Uusimmat viitteet

  • The Design and Simulation of Mechanisms 

    Sharifgalieva, Inna (Yrkeshögskolan Arcada, 2018)
    This thesis presents the study of 4-bar mechanism motion. The idea is modelling and analysing of a certain crank-rocker mechanism, researching the theoretical principles, to obtain mathematical and SolidWorks data. ...
  • Recycling of HDPE from MSW waste to 3D printing filaments 

    Angatkina, Kateryna (Yrkeshögskolan Arcada, 2018)
    This thesis investigates the suitability of Fortum CIRCO® HDPE for fused deposition modelling (FDM). Fortum CIRCO® HDPE is recycled high-density polyethylene sourced from municipal solid waste, provided by Fortum Waste ...
  • Dielectric Properties of Laminating Resin 

    Ojha, Krishna (Yrkeshögskolan Arcada, 2018)
    Resin has been used in industries because of different essence. The main objective of the thesis was to develop a module to study the dielectric constant change during wetting and curing and to study if the wetting of the ...
  • Photoelastic Stress Analysis of Polyethylene Terephthalate 

    dos Santos Kotila, Gabriela (Yrkeshögskolan Arcada, 2018)
    Photoelasticity is an experimental stress/strain-analysis method. This technique is based on the photoelastic effect which is a change in the optical indicatrix with mechanical stress. A polariscope is an instrument used ...
  • Flexural Rigidity (D) in Beams 

    Karis, Zious (Yrkeshögskolan Arcada, 2017)
    This thesis presents the theory behind the symmetrical and unsymmetrical beams with different cross-sections, the mathematical procedure in calculating the flexural rigidity of symmetrical beams and summarizing the ...
  • Manufacturing Methods of Foam for U-Value Meters 

    Buddle, Stuart (Yrkeshögskolan Arcada, 2017)
    The thesis is dependent upon a manufacturing conundrum of finding the best method of manufacturing for medium run productions. In this case 100 units of foam insulation for the U-Value Meters. These U-Value ...
  • Production of Polylactic acid in laboratory scale, and characterising the thermal properties. 

    Basnet, Shristi (Yrkeshögskolan Arcada, 2016)
    This thesis presents findings from experimental research on producing biodegradable plastic from corn starch. A corn consists of many parts, among which starch is used essentially in food and bioplastic products. A starch ...