Lönsamhetskalkyl av processändring vid Oy Snellman Ab : Dataanalysering och 3D-simulering
Hattar, Ronnie (2017)
Hattar, Ronnie
Yrkeshögskolan Novia
2017
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201704285735
https://urn.fi/URN:NBN:fi:amk-201704285735
Tiivistelmä
Följande examensarbete har gjorts enligt uppdrag av expeditionsavdelningen vid Snellmans Köttförädling Ab. Köttförädlingen hör till Snellman-koncernen som är verksam inom livsmedelsbranschen.
För expeditionens rullbandssystem har planerats en eventuell omändring. Avsikten med examensarbetet är att simulera nuläget samt läget efter förbättringen, för att analysera vad ändringen i systemet kunde leda till i form av effektivitet och pengar.
Tillvägagångssättet för analysen är 3D-simulering i programmet 3D-Automate, och analysering av statistik och data. Logiken i simuleringen har utarbetats genom observation, tidigare arbetserfarenhet från avdelning och information från handledaren. Från företagets sida har man gett anvisningar på vad man vill att skall beaktas i simuleringen.
Från simuleringen skall sannolika inbesparingen av systemändringen utarbetas, och utgående från det görs en investeringskalkyl.
Resultatet av examensarbetet är ett nuvärde på den möjliga investeringen, utifrån värdet ges en bedömning om systemändringen borde göras eller inte. The following Bachelor’s thesis has been completed on the behalf of the Dispatch department at Snellmans Köttförädling Ab. Snellmans Köttförädling is a part of the Snellman Group, who are active in the food industry.
A possible modification has been planned for the conveyor system at the dispatch department. The purpose of this Bachelor’s thesis is to simulate the current and the future system so an analysis can be made of the benefits, in terms of efficiency and economy.
The approach for the analysis is 3D-simulation in 3D-Automate, and analysis of statistics and data. The logic behind the simulation was determined by observation, former work experience at the department and information from my supervisor. From the company they have given me instructions on what should be considered in the simulation.
Based on the simulation a probable cost valuation, due to the system alteration, will be made. From the valuation, an investment appraisal will be composed.
The result of the thesis is a present value of the possible investment. Based on the present value an assessment on whether the system change should be made or not will be presented.
För expeditionens rullbandssystem har planerats en eventuell omändring. Avsikten med examensarbetet är att simulera nuläget samt läget efter förbättringen, för att analysera vad ändringen i systemet kunde leda till i form av effektivitet och pengar.
Tillvägagångssättet för analysen är 3D-simulering i programmet 3D-Automate, och analysering av statistik och data. Logiken i simuleringen har utarbetats genom observation, tidigare arbetserfarenhet från avdelning och information från handledaren. Från företagets sida har man gett anvisningar på vad man vill att skall beaktas i simuleringen.
Från simuleringen skall sannolika inbesparingen av systemändringen utarbetas, och utgående från det görs en investeringskalkyl.
Resultatet av examensarbetet är ett nuvärde på den möjliga investeringen, utifrån värdet ges en bedömning om systemändringen borde göras eller inte.
A possible modification has been planned for the conveyor system at the dispatch department. The purpose of this Bachelor’s thesis is to simulate the current and the future system so an analysis can be made of the benefits, in terms of efficiency and economy.
The approach for the analysis is 3D-simulation in 3D-Automate, and analysis of statistics and data. The logic behind the simulation was determined by observation, former work experience at the department and information from my supervisor. From the company they have given me instructions on what should be considered in the simulation.
Based on the simulation a probable cost valuation, due to the system alteration, will be made. From the valuation, an investment appraisal will be composed.
The result of the thesis is a present value of the possible investment. Based on the present value an assessment on whether the system change should be made or not will be presented.