Tärkkelyksen suihkutuslaitteen rakenteen kehittäminen
Mätäsaho, Rolf (2010)
Mätäsaho, Rolf
Jyväskylän ammattikorkeakoulu
2010
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2010060911827
https://urn.fi/URN:NBN:fi:amk-2010060911827
Tiivistelmä
Kartongin valmistuksessa tärkkelyksen suihkutus kartonkirainan pinnalle lisää huomattavasti kartongin kerrostenvälistä liitoslujuutta, mutta suihkutustapahtuman hallinta on haastavaa. Metso on pyrkinyt vuosien mittaan kehittämään suihkutuslaitteen rakennetta ilmenneiden ongelmien vähentämiseksi. Tästä huolimatta tarve toimivamman ratkaisun kehittämiseen on ollut jatkuva.
Työn tavoitteena oli kehittää Tärkki’09-projektissa ideoitua rakenne-ehdotusta niin, että suihkutusmenetelmällä ilmenneiden ongelmien syntymistä saataisiin merkittävästi ehkäistyä. Merkittävin ongelma on ajokatkot, jotka aiheutuvat tärkkelyksen sumuamisesta syntyneiden likakertymien tippuessa radalle ympäröivistä rakenteista.
Työn toteutuksen tärkein vaihe oli koelaitteen suunnittelu ja koeajojen suorittaminen, sillä rakenteen toimivuudesta ei ilman sen testaamista ollut varmuutta. Koeajotulosten analysoinnin kautta saatiin tieto suunnitellun rakenteen toimivuudesta sille asetettujen toiminnallisten vaatimusten mukaisesti.
Tuloksena saatiin selville, että testatulla rakenteella ei saavuteta opinnäytetyölle asetet-tua tavoitetta. Mekaanisella ilmankaavausrakenteella ei merkittävästi voida vähentää sumuamisesta johtuvaa likaantumista eikä sitä kautta estää ongelmien syntymistä. Niinpä jatkossa tulisikin keskittyä eri toimintatapaan pohjautuvan ratkaisun kehittämiseen.
The application of starch to the web surface notably improves the bonding strength
between the plies of the multi-ply board but controlling of the spraying process is a very
challenging task. Metso has been trying to develop the construction of the starch spraying
device to solve the problems occurred in spray application. This has not reduced the need
for the development of a more functional construction.
The aim of this study was to improve the construction of the device created in the project
Tärkki’09 in order that the problems perceived in the spraying process could be prevented.
The most significant problem has been the breaks caused by toppling of dirty lumps to the
web from the ambient structures. The contamination, for one, is caused by the fuming
starch.
Design and testing of the pilot device were the most important stages in the thesis because
the functionality of the device can not be known without testing it. Information on the
functionality within the limits of the functional requirements of the device was gained
through analyzing the test results.
As a result, it was found out that the aim of the work was not reached with the tested
construction. Neither the contamination caused by the fuming starch nor therefore the
problems can notable be prevented with the construction. In future one should
concentrate on the development of the solution based on a different functional mode.
Työn tavoitteena oli kehittää Tärkki’09-projektissa ideoitua rakenne-ehdotusta niin, että suihkutusmenetelmällä ilmenneiden ongelmien syntymistä saataisiin merkittävästi ehkäistyä. Merkittävin ongelma on ajokatkot, jotka aiheutuvat tärkkelyksen sumuamisesta syntyneiden likakertymien tippuessa radalle ympäröivistä rakenteista.
Työn toteutuksen tärkein vaihe oli koelaitteen suunnittelu ja koeajojen suorittaminen, sillä rakenteen toimivuudesta ei ilman sen testaamista ollut varmuutta. Koeajotulosten analysoinnin kautta saatiin tieto suunnitellun rakenteen toimivuudesta sille asetettujen toiminnallisten vaatimusten mukaisesti.
Tuloksena saatiin selville, että testatulla rakenteella ei saavuteta opinnäytetyölle asetet-tua tavoitetta. Mekaanisella ilmankaavausrakenteella ei merkittävästi voida vähentää sumuamisesta johtuvaa likaantumista eikä sitä kautta estää ongelmien syntymistä. Niinpä jatkossa tulisikin keskittyä eri toimintatapaan pohjautuvan ratkaisun kehittämiseen.
The application of starch to the web surface notably improves the bonding strength
between the plies of the multi-ply board but controlling of the spraying process is a very
challenging task. Metso has been trying to develop the construction of the starch spraying
device to solve the problems occurred in spray application. This has not reduced the need
for the development of a more functional construction.
The aim of this study was to improve the construction of the device created in the project
Tärkki’09 in order that the problems perceived in the spraying process could be prevented.
The most significant problem has been the breaks caused by toppling of dirty lumps to the
web from the ambient structures. The contamination, for one, is caused by the fuming
starch.
Design and testing of the pilot device were the most important stages in the thesis because
the functionality of the device can not be known without testing it. Information on the
functionality within the limits of the functional requirements of the device was gained
through analyzing the test results.
As a result, it was found out that the aim of the work was not reached with the tested
construction. Neither the contamination caused by the fuming starch nor therefore the
problems can notable be prevented with the construction. In future one should
concentrate on the development of the solution based on a different functional mode.