• Creating a system that monitors in real time the amount of newspaper coming into the mailrooms. 

      Adefila, Emmanuel (Hämeen ammattikorkeakoulu, 2011)
      The aim of this thesis was to create a new system that monitors in real time the amount of newspaper production that goes into the mailroom and select the best sensors, counters and in order to improve the accuracy of the ...
    • SCADA design and enterprise connectivity for a water processing system 

      TWUMASI, STANLEY (Hämeen ammattikorkeakoulu, 2011)
      This thesis is a development project designed to monitor and control a laboratory water processing system for Hamk University of Applied Sciences Automation Engineering Department. The main areas of this thesis can be ...
    • Planning a layout design for the washing line of Parker Hannifin Oy 

      Lartey, Daniel (Hämeen ammattikorkeakoulu, 2011)
      The aim of this thesis was to design a new layout and select the best conveyor system to enhance material flow to the complex industrial washing machines at the washing line. The purpose was also to prepare an Approval for ...
    • Automating a Production Cell : Case: Sisu Axles 

      Nowak, Jan-Peter (Hämeen ammattikorkeakoulu, 2012)
      This thesis was commissioned by Sisu Axles, a manufacturer of heavy duty axles. The object of the project was to determine the current status and operational limits of a differential casing manufacturing cell (TPKS), to ...
    • Telemecanique motor controller – use and instructions 

      Adjei, Yaw (Hämeen ammattikorkeakoulu, 2012)
      Electric motors are versatile electrical machines used in the industry and in many domestic appliances. They convert electrical energy into mechanical (rotational) energy. Following the advent of Induction motors, which ...
    • Vibration Measurement for Rotatory Machines : Importance of maintenance practices 

      Tatis, Rolando (Hämeen ammattikorkeakoulu, 2012)
      This thesis work was done in cooperation with Hi-Tekno Engineering and consulting office. The purpose of this thesis was to demonstrate the importance of vibration measurements in modern day production systems. The aim was ...
    • Stirling Engine Cycle Efficiency 

      Naddaf, Nasrollah (Hämeen ammattikorkeakoulu, 2012)
      ABSTRACT This study strives to provide a clear explanation of the Stirling engine and its efficiency using new automation technology and the Lab View software. This heat engine was invented by Stirling, a Scottish in ...
    • Programming and testing of storage conveyor in a virtual 

      Amida, Ademola (Hämeen ammattikorkeakoulu, 2013)
      This thesis was a developmental project to program and test a storage con-veyor model developed by the Research and Development Center of HAMK University of Applied Sciences. The model will be used to facili-tate teaching ...
    • Renew the car track control panel programming with SIEMENS 

      Adhikari, Jeevan (Hämeen ammattikorkeakoulu, 2013)
      This research examines use of automation controllers for the solution of automation problem. The automated car track at the HAMK automation la-boratory was used as an example for implementation. The commissioner of the ...
    • MACHINE VISION AND OBJECT SORTING : PLC Communication with LabVIEW using OPC 

      Pokharel, Bikarna (Hämeen ammattikorkeakoulu, 2013)
      The main objective of this thesis was to demonstrate a machine vision (MV) application for the quality control of products in an industry using a miniature production line station. A project was commissioned by HAMK ...
    • IMPLEMENTATION OF WIRELESS HART TECHNOLOGY FOR LIQUID LEVEL CONTROL AND MONITORING 

      Morakinyo, Samuel (Hämeen ammattikorkeakoulu, 2013)
      Wireless communication is emerging from the office world to the industrial world. Since industrial communication underlies stricter conditions than office communication. It is important that some technicalities are applied ...
    • Design of water cooling system for 6-axis welding robot drives 

      Ogunyale, Stephen (Hämeen ammattikorkeakoulu, 2013)
      The goal of this thesis work was to design a water-cooling system for a 6- axis welding robot drive, unlike the traditional air/fan cooling system. The purpose was to design a piping and instrumentation diagram for the ...
    • Designing a measurement system for HAMK Ohutlevykeskus : Designing a test system for concrete 

      Lonkin, Mihhail (Hämeen ammattikorkeakoulu, 2014)
      The purpose of the thesis was to create a measurement system for HAMK Ohutlevykeskus. The commissioning company designed and created the test station for testing concrete beams, by applying force onto concrete. Force ...
    • Machine Design and Vision Based Navigation 

      Gautam, Samrat (Hämeen ammattikorkeakoulu, 2014)
      This study covers the design of an autonomous robot and its testing process on an artificial maize field constructed for an indoor environment. However, the ultimate goal of this project was to participate in the ...
    • Automated Inspection of Apple Moth : Machine vision using OpenCV and Raspberry Pi 

      Taha, Mohamed; Gumaa, El Motasim (Hämeen ammattikorkeakoulu, 2014)
      This thesis is dedicated to the implementation of a machine vision algo-rithm on a Raspberry Pi Microcomputer. The commissioning client Teo Kanniainen conducted a research project on the subject of arranging low-cost ...
    • 3D-Workbench : Design and Development of a 3-Dimension Computer Numerical Controlled Machine 

      Sandru, Andrei (Hämeen ammattikorkeakoulu, 2015)
      The purpose of this thesis was to examine and develop a multipurpose Computer Numerical Controlled (CNC) device which would satisfy industrial requirements, but could also be implemented at universities for students to ...
    • Underwater deployment method using a hull gateway 

      Abramov, Stanislav (Hämeen ammattikorkeakoulu, 2015)
      This thesis project was completed by Stanislav Abramov and supervised by the Head of the Automation Degree Programme Antti Aimo. After receiving knowledge and experience in offshore operations the author decided to combine ...
    • Neural Network Programming : With the incorporation of a genetic evolution algorithm 

      Pintér, Martin (Hämeen ammattikorkeakoulu, 2016)
      The author's aim in this project was to develop a neural network unit with the incorporation of a genetic evolution algorithm, experimenting with possibilities and the artificial recreation of neurological registration, ...
    • FOOD PRODUCTION LINE DEVELOPMENT FOR TEKME 

      Podolskaya, Yulia (Hämeen ammattikorkeakoulu, 2017)
      The main focus of this thesis was to identify problem areas in the current work process of the food production line at Tekme department of Kanta- Hämen central hospital in Hämenlinna and to find possible ways to increase ...
    • Diagnostics for the veneer clipper 

      Doremidov, Andrey (Hämeen ammattikorkeakoulu, 2017)
      The aim of this thesis was the renovation of the diagnostics program code of the rotary veneer clipper with Raute Oyj. Today's code was done fifteen years ago, so the reason is obvious. The main code, the safety mode, the ...