Uusimmat viitteet

  • Production development in short run manufacturing 

    Kaczmarek, Michal (Hämeen ammattikorkeakoulu, 2018)
    The aims of this thesis are analysing current solutions and identifying main problems with production processes in the Company, as well as searching for costless or low-cost solutions to those issues. To accomplish those ...
  • Comparison of optical and tactile Coordinate Measuring Machines in a production environment 

    Kupriyanov, Vladimir (Hämeen ammattikorkeakoulu, 2018)
    The reason for the writing of this thesis is to compare two different ways of quality control – optical and tactile coordinate measurement machines. To find out their advantages and disadvantages, strengths and weaknesses, ...
  • Commercial plug-in cooler production development for Aste Finland Oy: Increasing the efficiency of current production and Development of the production shop for a factory extension 

    Polushkin, Philipp (Hämeen ammattikorkeakoulu, 2018)
    The thesis project is a part of the production development project of Aste Finland Oy, it proposes an optimisation of assembly production and introduces a solution for a production shop for the factory extension. Aste ...
  • Robotic Incremental Sheet Forming 

    Poudel, Binamra (Hämeen ammattikorkeakoulu, 2018)
    The aim of this thesis was to collect information on a new type of sheet forming method: Incremental Sheet Forming (ISF). This thesis was commissioned by Jussi Horelli, HAMK. The main objective was to examine the feasibility ...
  • Planning Preventive Maintenance for Pumps 

    Al-Dulaimi, Mustafa (Hämeen ammattikorkeakoulu, 2018)
    The purpose of this thesis was to create preventive maintenance for pumps in a production process. Thinkflow company was the commissioner of this thesis. The objectives of this thesis’s project were to create tools for ...
  • Safety Analysis and Solution of Rallysim 

    Islam, Rezwanul (Hämeen ammattikorkeakoulu, 2018)
    This thesis is about the safety analysis and the possible safety solutions of rallysim. A rallysim is a simulator which helps its user to enjoy the driving of a rally car game at the comfort of one’s home. To provide the ...
  • Stress Intensity Factor Solution using Distributed Dislocation Technique 

    Gribova, Ekaterina (Hämeen ammattikorkeakoulu, 2018)
    Nowadays, engineers are using fracture mechanics as a useful approach of studying structures with cracks. These cracks are present in structures due to manufacturing methods such as welding, machining and casting or due ...
  • Design of welding fixture for sample parts and user manual for Motoma XRC welding robot 

    Elahe, Ashek (Hämeen ammattikorkeakoulu, 2017)
    The thesis objective is comprised of two major parts, the first one is to prepare a concise manual for the Motoman XRC arc welding robot, and the second one is design process of a welding fixture for simple joints. The ...
  • MODIFICATION OF POWER DISTRIBUTION PANEL 

    Pandey, Durgesh (Hämeen ammattikorkeakoulu, 2017)
    This thesis is part of a product modification and optimization process of company ABC (modified name due to confidentiality) which specializes in low voltage panels and other electrical supplies. The main objective of ...
  • Design of full body workout machine 

    Pathak, Suman (Hämeen ammattikorkeakoulu, 2017)
    The purpose of this thesis was to design a full body workout machine. The main goal was to make a workout machine that was inexpensive, covered a small area and light in weight. This thesis was commissioned by HAMK University ...
  • Design and Construction of Railway Shelter 

    Edebor, Wilson (Hämeen ammattikorkeakoulu, 2017)
    This thesis is about the design and construction of a railway shelter for Iittala Asema with indigenes specialized in painting of art works. This design was to be driven by the relationship between the bus shelter, the ...
  • Standard test part for tensile test 

    Igunnuoda, Olorunmuyiwa (Hämeen ammattikorkeakoulu, 2017)
    The goal of this thesis was to make standard test parts for tensile test as the topic suggests. The task included among other things creating NC-programs which would be used in the manufacture of these parts on a CNC ...
  • Self-study manual for introduction to computational fluid dynamics 

    Nabatov, Andrey (Hämeen ammattikorkeakoulu, 2017)
    Computational Fluid Dynamics (CFD) is the branch of Fluid Mechanics and Computational Physics that plays a decent role in modern Mechanical Engineering Design process due to such advantages as relatively low cost of ...
  • Production optimization in a hydraulic cylinder workshop 

    Nekrasevits, Andrei (Hämeen ammattikorkeakoulu, 2017)
    Belautozap is a company located in Belarus that designs and manufactures hydraulic cylinders. Not until a while ago they were struggling after having made some wrong investments where their production took a toll. Now ...
  • Commissioning a Fatigue Testing Unit 

    Dementyev, Nikita (Hämeen ammattikorkeakoulu, 2017)
    Fatigue testing is a crucial aspect in the process of the engineering design. To acquire the information on the fatigue strength and life, testing equipment have been developed. With the help of such devices, the data on ...

Näytä lisää