Release Panel Feasibility Study : Concept design of release panel for fire protecting system in machinery spaces
Weckström, Filip (2011)
Weckström, Filip
Arcada - Nylands svenska yrkeshögskola
2011
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201103253573
https://urn.fi/URN:NBN:fi:amk-201103253573
Tiivistelmä
Arbetets syfte var att undersöka alternativa koncept för att framställa en aktiveringspanel som används för brandskyddssystem med vattendimma HIFOG i maskinutrymmen. Den nuvarande aktiveringspanelen är alltid planerad separat för varje projekt och byggs alltid från grund och botten. Detta har varit tidskrävande för hela organisationen, eftersom det är tidskrävande för elplaneringen, produktionen och installationen. Målet är att göra elplaneringen, produktionen och installationen mer snabbare och effektivare med en moduler aktiveringspanel. Med en standardiserad panel ökar alternativen för funktioner som medför att panelen kan användas projekt som projekt med så få ändringar som möjligt.
Det nya konceptet bör vara mer kostnadseffektivt samt snabbare att producera.
Eftersom den nuvarande panelen alltid har sätt likadan ut, bortsätt från komponent uppdateringar är det nu en bra möjlighet att uppdatera panelen till dagens teknik.
Målet med detta arbete är att komma upp med ett koncept som enkelt kan planeras, produceras och installeras.
Den praktiska informationen har fåtts genom fabrikstester på den nuvarande panelen, och genom att intervjua personal från både produktionslinjen och elplanerare från utvecklings och projekt avdelningar.
Det koncept som väljs kommer inte att bli det slutliga och kräver ytterligare utveckling för att bli en slutlig produkt. The intention of this degree thesis is to explore an alternative concept for the release panel used for water mist fire protection system HIFOG in machinery spaces.
The current release panel is always designed separately for each project, and always built from scratch. This has been heavy throughout the organization, because it is time consuming for the electrical designer, production line and installation. The goal is to make the planning stage, production line and installation faster and more efficient with a more adaptive and modular panel.
With standardized panels the amount of alternatives increases, and the panel can be used for any project with as little modification as possible.
The new concept has to be more cost effective and faster to produce. Because the design of the release panel has always been the same, and not connected to component updates, there is a great opportunity to make it to the stateof art level.
The purpose with the new concept is to plan a release panel that the electrical designer can easily design, and it can be used for projects as projects with as little modification as possible.
The practical information I have received by making factory tests on the current release panel, and by interviewing personnel both from production line and electrical designers from R&D and project departments.
The concept that I choose will not be the final one and requires further development to be a final product.
Det nya konceptet bör vara mer kostnadseffektivt samt snabbare att producera.
Eftersom den nuvarande panelen alltid har sätt likadan ut, bortsätt från komponent uppdateringar är det nu en bra möjlighet att uppdatera panelen till dagens teknik.
Målet med detta arbete är att komma upp med ett koncept som enkelt kan planeras, produceras och installeras.
Den praktiska informationen har fåtts genom fabrikstester på den nuvarande panelen, och genom att intervjua personal från både produktionslinjen och elplanerare från utvecklings och projekt avdelningar.
Det koncept som väljs kommer inte att bli det slutliga och kräver ytterligare utveckling för att bli en slutlig produkt.
The current release panel is always designed separately for each project, and always built from scratch. This has been heavy throughout the organization, because it is time consuming for the electrical designer, production line and installation. The goal is to make the planning stage, production line and installation faster and more efficient with a more adaptive and modular panel.
With standardized panels the amount of alternatives increases, and the panel can be used for any project with as little modification as possible.
The new concept has to be more cost effective and faster to produce. Because the design of the release panel has always been the same, and not connected to component updates, there is a great opportunity to make it to the stateof art level.
The purpose with the new concept is to plan a release panel that the electrical designer can easily design, and it can be used for projects as projects with as little modification as possible.
The practical information I have received by making factory tests on the current release panel, and by interviewing personnel both from production line and electrical designers from R&D and project departments.
The concept that I choose will not be the final one and requires further development to be a final product.