Theseus käyttökatko ma 22.4. klo 12 alkaen. Katko jatkuu 22.4. klo 15 asti ja on koko Theseuksen laajuinen. Lisäksi töiden käsittely ja syöttö on estetty ti 23.4. ainakin klo 12 asti.
Theseus service break from Mon 22.4. at 12:00. The break will last until 15:00 on Mon 22.4. and is Theseus-wide. In addition, processing and uploading of work will be blocked until at least 12:00 on Tue 23.4.
A Comparative Study of Passive and Active Sampling Methods for Measuring Indoor Particulate Matter
Soltani, Mahnaz (2011)
Soltani, Mahnaz
Tampereen ammattikorkeakoulu
2011
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201104204551
https://urn.fi/URN:NBN:fi:amk-201104204551
Tiivistelmä
The presented thesis is based on evidence gathered by the Passive Sampler project supported by the University of Applied Sciences Tampere (TAMK) started in Mai 2010.
At the stage of the project, economic and technical reasons forced the team to choose the Passive Sampler (PS) developed by Vinzents, which is easier to implement for the laboratory experiments than the Electret Passive Sampler. In controlled circumstances the Vinzents PS is compared to conventional active dust measurement devices in order to prove the reliability of the simple and cheap passive measurement as an alternative to the more elaborate active sampling method. The measurement took place in a dust tunnel of the Univer-sity of Applied Sciences in Tampere and with the same kind of fine dust sample in a size range of 1-192μm from the concrete laboratory. The results of the comparative study between passive and active sampler show a significant correlation leading to the conclusion that passive samplers offer a cheaper and easier alternative for personal dust control. Therefore, further research in this area will prove worthwhile. Due to the stage of the project a claim for complete-ness is impossible and further investigations are needed. Die vorliegende Arbeit erwuchs einem Projekt zum Thema “Passive Sampler”, das in Kooperation der University of Applied Sciences of Tampere (TAMK) und der finnischen Behörde für Arbeitssicherheit und Gesundheit seit Mai 2010 durchgeführt wird.
Das Ziel des Projektes besteht darin, alternative Messmethoden für eine personenbezogene Messung der Feinstaubbelastung am Arbeitsplatz zu ermitteln.
Die vorliegende Arbeit untersucht in diesem Zusammenhang die Verwendbarkeit von Passive Sampler/Passivsammlern am Beispiel des kostengünstigen und leicht handhabbaren Passive Sampler entwickelt von Vinzents. Es kann gezeigt werden, dass die mit diesem Sammler unter kontrollierten Bedingungen in einem Staubtunnel gewonnenen Messergebnisse für Betonstaub der Größe 1-192 μm zuverlässig sind, dahingehend, dass Sie eine Korrelation zu den aktiv ermittelten Messwerten darstellen. Daher ist Einsatz dieses Passivsammlers zur Messung der Staubbelastung am Arbeitsplatz sinnvoll und geboten.
At the stage of the project, economic and technical reasons forced the team to choose the Passive Sampler (PS) developed by Vinzents, which is easier to implement for the laboratory experiments than the Electret Passive Sampler. In controlled circumstances the Vinzents PS is compared to conventional active dust measurement devices in order to prove the reliability of the simple and cheap passive measurement as an alternative to the more elaborate active sampling method. The measurement took place in a dust tunnel of the Univer-sity of Applied Sciences in Tampere and with the same kind of fine dust sample in a size range of 1-192μm from the concrete laboratory. The results of the comparative study between passive and active sampler show a significant correlation leading to the conclusion that passive samplers offer a cheaper and easier alternative for personal dust control. Therefore, further research in this area will prove worthwhile. Due to the stage of the project a claim for complete-ness is impossible and further investigations are needed.
Das Ziel des Projektes besteht darin, alternative Messmethoden für eine personenbezogene Messung der Feinstaubbelastung am Arbeitsplatz zu ermitteln.
Die vorliegende Arbeit untersucht in diesem Zusammenhang die Verwendbarkeit von Passive Sampler/Passivsammlern am Beispiel des kostengünstigen und leicht handhabbaren Passive Sampler entwickelt von Vinzents. Es kann gezeigt werden, dass die mit diesem Sammler unter kontrollierten Bedingungen in einem Staubtunnel gewonnenen Messergebnisse für Betonstaub der Größe 1-192 μm zuverlässig sind, dahingehend, dass Sie eine Korrelation zu den aktiv ermittelten Messwerten darstellen. Daher ist Einsatz dieses Passivsammlers zur Messung der Staubbelastung am Arbeitsplatz sinnvoll und geboten.