Datorer för underhåll och övervakning av komponenter i automationssystem
Forsström, Dan (2012)
Forsström, Dan
Arcada - Nylands svenska yrkeshögskola
2012
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2012082513253
https://urn.fi/URN:NBN:fi:amk-2012082513253
Tiivistelmä
I examensarbetet undersöks olika möjligheter för underhåll och övervakning av komponenter i automationssystem. Beställaren betonade att den fungerande miljön bör vara enkel att upprätthålla, att säkerheten är en viktig faktor och att det skall vara möjligt att få data sparat externt.
Examensarbetet består av en teoretisk och en praktisk del. I teoridelen beskrivs virtualisering som är tekniken i den praktiska delen, samt verktygen och hurudana virtualiseringsmöjligheter som erbjuds. Den praktiska delen beskriver de virtualiseringsmöjligheter som har testats och problem som uppstått samt hur de är lösta. Den virtualiseringsmetod som fungerade och konceptets vidareutveckling beskrivs också.
Applikationsvirtualisering och full virtualisering har testats. Applikationsvirtualiseringen orsakade licensproblem i processkomponenternas programvaror. Problemen gick inte att åtgärda och därför slopades alternativet. Problem uppstod också vid full virtualisering. Några processkomponenters programvaror var versionskänsliga. Problemen gick att lösa med hjälp av rätt version av virtualiseringsverktygen. De virtuella maskinerna måste konfigureras innan första uppstarten för att serieporten skall bli tillgänglig och att dataöverföring skall bli möjlig. Både de fysiska och de virtuella maskinerna är härdade och säkrade. The aim of the thesis was to investigate ways to maintain and monitor automation system components. The orderer emphasized that the working environment should be easy to maintain, that security is an important factor and that it should be possible to get data stored externally.
The thesis consists of a theoretical and a practical part. The theoretical part describes vir-tualization which is the technology in the practical part, the tools and what kind of virtu-alization opportunities is offered. The practical part describes the virtualization capabilities that have been tested, problems identified and how they are solved. The virtualization method that worked and further development of the concept is also described.
Application virtualization and full virtualization has been tested. Application virtualiza-tion caused component software license issues. The problems could not be solved and therefore application virtualization was abandoned. Also in full virtualization occurred problems. Some software components were version sensitive. The problems were solved by using the correct version of the virtualization tools. The virtual machines must be con-figured before the first boot, in order to get serial port access and to make data transfer possible. Both the physical and the virtual machines are hardened and secured.
Examensarbetet består av en teoretisk och en praktisk del. I teoridelen beskrivs virtualisering som är tekniken i den praktiska delen, samt verktygen och hurudana virtualiseringsmöjligheter som erbjuds. Den praktiska delen beskriver de virtualiseringsmöjligheter som har testats och problem som uppstått samt hur de är lösta. Den virtualiseringsmetod som fungerade och konceptets vidareutveckling beskrivs också.
Applikationsvirtualisering och full virtualisering har testats. Applikationsvirtualiseringen orsakade licensproblem i processkomponenternas programvaror. Problemen gick inte att åtgärda och därför slopades alternativet. Problem uppstod också vid full virtualisering. Några processkomponenters programvaror var versionskänsliga. Problemen gick att lösa med hjälp av rätt version av virtualiseringsverktygen. De virtuella maskinerna måste konfigureras innan första uppstarten för att serieporten skall bli tillgänglig och att dataöverföring skall bli möjlig. Både de fysiska och de virtuella maskinerna är härdade och säkrade.
The thesis consists of a theoretical and a practical part. The theoretical part describes vir-tualization which is the technology in the practical part, the tools and what kind of virtu-alization opportunities is offered. The practical part describes the virtualization capabilities that have been tested, problems identified and how they are solved. The virtualization method that worked and further development of the concept is also described.
Application virtualization and full virtualization has been tested. Application virtualiza-tion caused component software license issues. The problems could not be solved and therefore application virtualization was abandoned. Also in full virtualization occurred problems. Some software components were version sensitive. The problems were solved by using the correct version of the virtualization tools. The virtual machines must be con-figured before the first boot, in order to get serial port access and to make data transfer possible. Both the physical and the virtual machines are hardened and secured.