Occupational Safety Requirements for the Welding Production
Bazarova, Irina (2013)
Bazarova, Irina
Saimaan ammattikorkeakoulu
2013
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2013092215465
https://urn.fi/URN:NBN:fi:amk-2013092215465
Tiivistelmä
The purpose of the research was to study the welding production process in view of the occupational safety and fire safety.
In the theoretical part of the study the main issue was targeted at researching Russian regulations concerning the safety questions on production. By the use of the reference data the study introduced the recommended way of the production’s works organization in a welding factory in particular.
Initial data was taken right on the factory and during the conversation with the Production Manager, the Main Construction Engineer and the Executive Director. Data for this study research was collected from the electronic technical libraries. By the use of the all already mentioned sources several accountancies were made and the preliminary emergency plan was developed.
The main aim of this study was to consider the factory in view of the safety questions and make an attempt to give some characteristics. Then by the use of the reference sources the information about the recommended way of the occupational safety system handling was provided in accordance with the Russian standards and norms.
As a result of this study a list of recommendations for safe works and the key points of the occupational safety control were researched.
In the theoretical part of the study the main issue was targeted at researching Russian regulations concerning the safety questions on production. By the use of the reference data the study introduced the recommended way of the production’s works organization in a welding factory in particular.
Initial data was taken right on the factory and during the conversation with the Production Manager, the Main Construction Engineer and the Executive Director. Data for this study research was collected from the electronic technical libraries. By the use of the all already mentioned sources several accountancies were made and the preliminary emergency plan was developed.
The main aim of this study was to consider the factory in view of the safety questions and make an attempt to give some characteristics. Then by the use of the reference sources the information about the recommended way of the occupational safety system handling was provided in accordance with the Russian standards and norms.
As a result of this study a list of recommendations for safe works and the key points of the occupational safety control were researched.