Uusimmat viitteet

  • Internet of things: Smart Home Device 

    Magicho, Mesay (Metropolia Ammattikorkeakoulu, 2018)
    The purpose of this project aims to design and implement a smart home device that can be deployed into residential and office settings to control temperature and humidity to a desired level. At the same time this helps us ...
  • A Study about the Elimination of Component External Calibration in Intraoral Imaging Plate Scanner 

    Nguyen, Doan (Metropolia Ammattikorkeakoulu, 2018)
    This thesis describes the process of how the external calibration of component in intraoral imaging plate scanner or photomultiplier tube (PMT) in specific could be eliminated using measurements and statistics. The result ...
  • Implementing Controller Area Network : Hybrid Drivetrain ECU 

    Sharp, Ashley (Metropolia Ammattikorkeakoulu, 2018)
    This document will discuss the implementation of Controller Area Network (CAN) communication protocol as a substitute for general analog and Digital (I/O) signals as a primary means to control an automotive hybrid drive-train ...
  • Radio Frequency Power Detector : A Handheld Power and Signal Source Detector 

    Mendes Sampaio, Thales (Metropolia Ammattikorkeakoulu, 2018)
    The purpose of this project was to design and implement a portable device capable of measuring the power level of specific radio transmissions, and identifying if the signal comes from the desired source. The results are ...
  • PIR Sensor Based Security System 

    Tarus, Zipporah (Metropolia Ammattikorkeakoulu, 2017)
    This thesis deals with the design and implementation of a PIR sensor-based home security system which uses Raspberry pi and PIR sensor. The project is designed to assure home security through surveillance. The project ...
  • Safety System in Construction Industry : A protection system preventing fatal injuries by excavators in construction sites 

    Vo, Huynh (Metropolia Ammattikorkeakoulu, 2017)
    The purpose of this study was the implementation of an automatic protection system for workers working near excavators, which is identified as one of the targeted hazards and causes for fatal injuries in construction ...
  • Remote Controller for TV from Windows Phone : WP TV Controller 

    Ma, Runsen (Metropolia Ammattikorkeakoulu, 2017)
    The objective of this study was to design a windows phone remote controller for a TV with microcontrollers,a touch screen keyboard for the WP that sends commands to the microcontrollers. In this study, codes for Windows ...
  • High Power Wireless Transfer : For Charging High Power Batteries 

    Gill, Himmat (Metropolia Ammattikorkeakoulu, 2017)
    Wireless power transfer (WPT) is developing with emerging of new technologies that has made it possible to transfer electricity over certain distances without any physical contact, offering significant benefits to modern ...
  • Modular Sensor Environment : Audio Visual Industry Monitoring Applications 

    Guillot, Calvin (Metropolia Ammattikorkeakoulu, 2017)
    This work was made for Electro Waves Oy. The company specializes in Audio-visual services and interactive systems. The purpose of this work is to design and implement a modular sensor environment for the company, which ...
  • ESD instructions for electrical workshops 

    Pelkonen, Jere (Metropolia Ammattikorkeakoulu, 2017)
    The goal of this thesis is writing instructions about Electrostatic Discharge (ESD) protection and how to build Electrostatic Protective Areas (EPA) for an electrical repair workshop use. These instructions are made for a ...
  • Detection of microbial concentration in water - impedance method 

    Gemeda, Meron (Metropolia Ammattikorkeakoulu, 2017)
    Impurities in drinking water are a major source of concern. These factors that contribute to low drinking water quality can have consequences ranging from minimal to mild to life threatening. Microbial presence in water ...
  • Water Quality Measuring Station : pH, turbidity and temperature Measurement 

    Sigdel, Bishal (Metropolia Ammattikorkeakoulu, 2017)
    This project is carried out for the measurement of quality of water for the Metropolia UAS using sensors and micro-controller. Water is indispensable for the living beings, and clean water is critical because of the modern ...
  • Wireless Monitoring of Patients : Implementation Of Wireless Body Area Network 

    Lama, Suresh (Metropolia Ammattikorkeakoulu, 2017)
    Patients in hospitals have difficulty with health equipment that is connected with wires to their body. Wired health equipment restricts the mobility of the patient. Moreover, health caretakers are compelled to visit ...
  • Automated Testing Process for D-Fend Water Trap 

    Claassen, Joshua (Metropolia Ammattikorkeakoulu, 2017)
    In this thesis testing methods were explored and developed in order to implement automated product testing. General Electric (GE) Healthcare Finland is designing a new, fully automated, assembly line and this project was ...
  • Emotiv Epoc of Medical Engineering 

    Ranjitkar, Bikash (Metropolia Ammattikorkeakoulu, 2017)
    The thesis was conducted to find out whether the neuro headset device called Emotv Epoc can be used as an equipment to aid in teaching the medical engineering students in Metropolia university of applied sciences. The other ...

Näytä lisää