KoulutusalaElektroniikka

    • Rain Sensor Alarm Project 

      Hoor, Alaa (2021)
      This work focuses on using rain sensor, and it can be used in both everyday life and manufacturing. The ultimate goal of this project is to detect rain using a rain sensor. We used a555 IC, which works like a timer, sending ...
    • Rakennusautomaation työaikainen suunnittelu 

      Tuuna, Lauri (Turun ammattikorkeakoulu, 2018)
      Tämän opinnäytetyön tarkoituksena oli laatia täsmällistä perehdytysmateriaalia rakennusautomaatiojärjestelmistä, taloteknisistä prosesseista sekä projektinhallinnasta tuleville projektinhoitajille. Tätä varten laadittiin ...
    • Raspberry Pi and IP Camera 

      Nasir, Danyal (2020)
      The main objective of this project was to create a program for Raspberry Pi that shows live video feed on a display as a form of surveillance using an IP (Internet Protocol) camera. The goal was to try to create a simple ...
    • Real-time transmission in a WLAN 

      Tuomisto, Tommi (Turun ammattikorkeakoulu, 2014)
      Tämän opinnäytetyön tavoitteena oli tuoda esille ne langattoman lähiverkon osatekijät ja menetelmät, jotka vaikuttavat merkittävästi reaaliaikaisen, IP-pohjaisen datan kulkemiseen verkon läpi. Aiheen opinnäytetyöhön ...
    • Reduction of redundancy in LTE CA IOP performance testing 

      Suvilampi, Jukka (Turun ammattikorkeakoulu, 2015)
      The purpose of this thesis was to reduce the test run times in interoperability testing. Carrier Aggregation, a functionality of LTE-Advanced, increases test run times. In this thesis, the redundancy in test cases and it’s ...
    • Reference Radiator for EMC Measurements : Oscillator and Wideband LPDA Antenna Design 

      Karki, Sunil (Metropolia Ammattikorkeakoulu, 2017)
      The aim of this thesis was to produce a reference radiator for Electromagnetic Compatibility (EMC) measurements, where a Voltage Controlled Oscillator (VCO) is used to generate wide-band signals of 600-1300 MHz, that will ...
    • Referenssiantennien suunnittelu ja toteutus 

      Glad, Jussi (Metropolia Ammattikorkeakoulu, 2014)
      Tämän insinöörityön tavoitteena oli suunnitella ja valmistaa kahdet erityyppiset antennit kahdelle eri taajuudelle. Antennien on tarkoitus toimia referenssiantenneina automatisoidussa antennien säteilysuuntakuvion ...
    • Reklamaatiokäsittelyprosessin kehittäminen 

      Vainio, Jussi (Metropolia Ammattikorkeakoulu, 2013)
      Reklamaatioiden hoitaminen on tärkeää, jotta tuotteita ja palveluja voidaan kehittää yhä paremmiksi. Tässä insinöörityössä kehitettiin Planmeca Oy:n digitaalisten kuvantamislaitteiden sensoreiden reklamaatiokäsittelyprosessia. ...
    • Reliability Assessment of Millimetre Wave Components for Space Applications 

      Levo, Jarmo (Metropolia Ammattikorkeakoulu, 2014)
      This thesis was aimed at the objective of designing and producing reliability measurement for millimetre wave components that are designed for high frequencies. The components are designed to function in frequency levels ...
    • Remote Controller for TV from Windows Phone : WP TV Controller 

      Ma, Runsen (Metropolia Ammattikorkeakoulu, 2017)
      The objective of this study was to design a windows phone remote controller for a TV with microcontrollers,a touch screen keyboard for the WP that sends commands to the microcontrollers. In this study, codes for Windows ...
    • Reverberation Chamber Test System for Antenna Measurements 

      Jernfors, Jyri (2024)
      Tämän opinnäytetyön tavoitteina oli ottaa RTS60-testijärjestelmä käyttöön GE Healthcare Finland Oy:lle sekä kehittää CLI-pohjainen testiohjelma heijastuskammion ohjaukseen. Yritys käyttää testijärjestelmää langattomien ...
    • Review of Data Converters 

      Poudel, Arjun (2021)
      The goal of this report is to review different types of electronic data converters developed till now. The report also goes through working and characteristics of those converters in brief. To support the review, a ...
    • RF-Vahvistimen suunnittelu ja toteutus 868 MHz:lle 

      Kuusisto, Otto (Turun ammattikorkeakoulu, 2017)
      Opinnäytetyön aiheena oli suunnitella ja toteuttaa RF-vahvistin LoRan (langattoman tiedonsiirron teknologia) taajuusalueelle 868 MHz. Työn tavoitteena oli toteuttaa vahvistimen sovituspiirit fyysisillä komponenteilla. ...
    • RFID based Anti-theft System for Metropolia UAS Electronics laboratories 

      Weldemedhin, Desta (Metropolia Ammattikorkeakoulu, 2016)
      The aim of this thesis is to study different types of RFID based anti-Theft system implementation suitable for Metropolia Electronics laboratory environment to deter theft taking into account several installation requirements. ...
    • RFID Based Coupon Management 

      Ghebreyesus, Mahdere Yoseph (Metropolia Ammattikorkeakoulu, 2015)
      The radio frequency identification project was carried out at ITSC plc in Ethiopia. The host who involves in oil and gas distribution use barcode for tracking activity. The drawbacks of barcode for instance, lack of memory ...
    • RFID Tag + Reader 

      Gesese, Derej (2021)
      This thesis focuses on the development of a prototype RFID system project using 13.56MHz frequency band and a passive RFID system. This RFID thesis aims to give an understanding of the operation about the RFID technology ...
    • RFID Tag Identification and Display : Prototype of a Tag ID Reading System 

      Zhu, Hao (2021)
      Radiofrequency identification (RFID) is a kind of contact-less Internet of things information exchange technology, which has been widely used in people's daily life and modern scientific and technological production as a ...
    • RFID-Lock with Face-Recognition 

      Rasmussen, Matias (2022)
      The objective of the project was to build and design a prototype of a face-recognising RFID locking system, using RFID rings, to provide a smoother and more secure entry of any pathway. From hardware point of view, the ...
    • RFID-tunnisteen kehittäminen 

      Poikola, Sami (Metropolia Ammattikorkeakoulu, 2011)
      Insinöörityössä perehdyttiin UHF-alueen RFID-järjestelmien toimintaan valmistamalla Metropolia Ammattikorkeakoululle useita 868 MHz:n RFID-tunnisteita käytettäväksi RFID-tekniikan opintojakson laboratoriotöissä. Lisäksi ...
    • RFID:n tekniset ratkaisut ja investointikustannukset 

      Pajula, Tatu (Turun ammattikorkeakoulu, 2014)
      Tämän opinnäytetyön tavoitteena oli kartoittaa RFID:n eli radiotaajuuksien avulla toimivan teknologian ratkaisuja ja mahdollisuuksia yritystoiminnassa. Työssä kartoitetaan erilaisia teknisiä mahdollisuuksia ja niiden ...