Theseus - Selaus asiasanan mukaan "electromagnetic compatibility"
Viitteet 1-10 / 10
-
Designing and Building a Load Bank for UNIC Modules
(2019)This Bachelor’s thesis was commissioned by Wärtsilä Marine Solutions in Vaasa, for the team Embedded Automation Testing. The purpose of the thesis was to design, build and document a custom made test rig that will be used ... -
EMC Measurement Feasibility Study for Automated Test System
(2022)The objective of this thesis was to study and test the possibility of performing electromagnetic compatibility measurements with an automated test system. This thesis starts with theory part of the electromagnetic compatibility ... -
Inverter Module Usage as a DC Power Supply for Solar Pump Application EMC Testing
(2022)Opinnäytetyö tehtiin ABB Oy:lle. Työn tarkoituksena oli löytää ABB:n laitteista ratkaisu aurinkopumppujen EMC-testaukseen. Myös kaupallista tasavirtalähdettä testattiin. Mittaustuloksia verrattiin standardin IEC62920 ... -
Minimizing Electromagnetic Interference on BLDC Motor Controller Design
(2024)The purpose of this thesis work was to design hardware for BLDC motor controller for Oceanvolt’s new HighPower ServoProp system. The BLDC motor controls the controllable propeller blades of the saildrive to optimal angles ... -
PCB Design for EMC Testing
(2020)With technology speeding up, electronic circuits are widely used in different applications, such as communication, computation, automation. Circuitry is getting smaller in physical size which increases the chance of EMI ... -
Pre-Compliance EMC Testing for EV Charging Station
(2023)The thesis project aimed to conduct pre-compliance electromagnetic compatibility (EMC) testing on prototype of the electric vehicle (EV) charging station as part of Big-Flash project in Metropolia University of Applied ... -
Prevention of EMI in the CAN bus systems of electric mining vehicles
(2023)Tämän opinnäytetyön aiheena oli sähkömagneettiset häiriöt Normetin sähkökäyttöisten kaivosajoneuvojen CAN-väyläjärjestelmissä. Tavoitteena oli vähentää häiriöstä aiheutuvia ongelmia muodostamalla yhteiset periaatteet ...Rajattu käyttöoikeus / Restricted access / Tillgången är begränsad -
Reference Radiator Design and Implementation by Using Programmable Clock Generator
(2022)The reference radiator has been an indispensable tool for Electromagnetic Compatibility (EMC) laboratories where it is used as a well-calibrated and well-known noise source to ensure the quality of measurement results. The ... -
Step-Down Switching Regulator Design
(2022)The goal of the thesis project was to design two different step-down switching regulators which would be measured for their line and load regulation. EMC measurement was also done for the PCBs since switching regulators ... -
Test Instructions for EV Supply Equipment EMC Tests Based on IEC 61851-21-2
(2024)Electromagnetic compatibility testing is done to ensure that electrical devices do not disturb each other via conducted or radiated disturbances. EMC tests are carried out according to standards made by organizations such ...








