Theseus - Selaus asiasanan mukaan "electronics"

    • 1 GHz Power Rail Probe 

      Otsavaara, Tommi (2023)
      Työn tarkoituksena oli suunnitella edullinen oskilloskoopin anturi korkeataajuuksisten häiriöiden mittaukseen tasajännitelähteistä. Työssä käydään läpi suunnitteluprosessi ja kytkentäkaaviot esitetylle ratkaisulle, jonka ...
    • A Dummy Load for Testing and Measuring Amplifiers 

      Oksanen, Jarkko (2022)
      This thesis went through the process of designing a versatile resistive load used when testing amplifiers at Darkglass Electronics Oy. The device was intended for internal use in the company in the process of product ...
    • A Self-Stabilizing Platform 

      Munana, Bilal (2022)
      Nowadays, electronics and mechanical devices are increasingly adapting the concept of self-stabilization. Similarly, as in the case of self-stabilization, self-stabilizing platforms have been utilized in numerous engineering ...
    • An Unlimited Instrument: Teaching Live Electronics and Creativity 

      Mämmi, Josu (2023)
      This thesis explores the intricacies of teaching live electronics and the inherent creativity involved in this field. Live electronics involves the use of technology to create music in real-time performances, encompassing ...
    • Application of Piezo Electronic Sensor in Jump Counting 

      Ha, Thinh (2021)
      The aim of the project was to design and test a prototype of a system that can be attached to a trampoline to sense impacts caused by jump movement. The system will detect the movement and store the number of jumps to a ...
    • Automated Test Environment for a 5G Radio Power Supply 

      Tähtinen, Ville (2022)
      This bachelor’s thesis was a project made for Nokia Networks. Nokia Networks is a subsidiary of Nokia Corporation which is a global multinational company focusing in telecommunications, information technology and consumer ...
    • Automotive Fuse Circuit Board 

      Espiguinha, Pedro (2021)
      The main goal of the work encompassed in this thesis was to answer a real need for a product from Sensible 4 Oy, which would allow for a faster and easier alternative to troubleshoot issues, while at the same time reducing ...
    • Bucket Brigade Delay 

      Stick, Eeli (2023)
      Työn tarkoitus oli suunnitella mahdollisimman pitkälle Bucket Brigade -periaatteella toimiva viive-efekti audiokäyttöön. Valmis laite muokattaisiin sopivaksi Knif Audion syntetisaattoriin. Työssä käsitellään viive-efektin ...
    • Commissioning of Imperix B-Board Controller 

      Säteri, Miikka (2021)
      Turun ammattikorkeakoulun Uuden energian tutkimusryhmän vastuulla on järjestää tehoelektroniikan opintomoduuli energia- ja ympäristötekniikan koulutusohjelmaan. Lisäksi he tekevät tutkimus-, kehitys- ja innovaatiotoimintaa ...
    • Comparing IoT system deployment on Raspberry Pi 4 Model B and Odroid-C2 devices 

      Ecker, Jonathan (2022)
      A common problem for microcontroller devices and most technology, in general, is measuring and comparing devices or components to determine which product best suits a situation and the benefits or drawbacks each possesses. ...
    • Comparison of Millimeter Wave Radar Sensors 

      Weinreb, Roey (2024)
      Millimeter wave (mmWave) radar employs electromagnetic waves within the millimeter-wave band, ranging frequencies from 30 to 300 GHz. It offers numerous benefits compared to alternative radar types, such as enhanced ...
    • Controllable Multiplexer for High Frequency Signals 

      Csortos, Marcell (2024)
      Calibration of a multichannel oscilloscope using a single channel source requires a significant amount of manual labour or an automated system. Adding automation will relieve the human resource for other tasks, thus ...
    • Creating a CAD Library for Printed Passive Components 

      Xu, Zhenxing (2022)
      The objective of this master’s thesis was to create a CAD library for printed passive components. An electronic system consists of electronic components. Designing an electronic system with CAD software starts with selecting ...
    • Design and Implementation of a Signal Reading Device for an Analog Output Module 

      Tran, Nhan (2021)
      An Analog Output Module (AOM) is a multichannel signal generating device provided by EKE-Electronics Ltd, and there is a need for monitoring the AOM channels concurrently during testing phases or customer project work at ...
    • Design of a 5 A Constant Current Source 

      Pandey, Amit (2021)
      This work presents the development of three different current source circuits providing constant 5 A output. The purpose of this project is to provide enough thermal power to cut surgical sutures of lifeline thread. This ...
    • Design Rules and Equations for Modern PCB Design 

      Sharov, Vladimir (2022)
      This thesis aims to study the basic techniques for developing printed plans, the mathematical justification of these techniques and their use in practice. This work consists of four main blocks: the main components used ...
    • Design, Simulation and Testing of Rectangular Microstrip Antennas 

      Pöntinen, Tuuli (2024)
      Tämä opinnäytetyö käsitteli suorakulmaisten mikroliuska-antennien teoriaa, suunnittelua, simulointia ja testausta. Mikroliuska-antennit rakentuvat piirikortille painetuista metallisista mikroliuskoista. Antenneja ...
    • Designing a Bed of Nails Tester 

      Velasco, Julius (2023)
      Tässä opinnäytetyössä käydään läpi neulapetitestilaitteen suunnittelu ja toteutus. Kyseistä testeriä voidaan yleisesti käyttää esimerkiksi jännitteen, virran tai resistanssin mittaamiseen piirilevyltä. Neulapetitestilaitetta ...
    • Designing a Bipedal Robot Prototype 

      Velasquez, Manuel (2022)
      Nowadays numerous researches about bipedal robots are made. The idea of having a bipedal robot around humans is an attractive idea for many people. Those robots could help in society task such as helping older people in ...
    • Designing a High Voltage Battery for a Formula Student Vehicle 

      Jahn, Markus (2021)
      The purpose of this thesis was to document information on designing and manufacturing process of a high voltage battery for a Formula Student competition vehicle. The thesis discusses component selection, design of the ...