Theseus - Selaus asiasanan mukaan "manufacturing"

    • 3D printing with diverse materials 

      Rahman, Mahfuzur (2024)
      This thesis explores the expanding capabilities of 3D printing technology using various materials. At first, it was developed for rapid prototyping, mainly using plastics. With the advancement of time,3d printing has evolved ...
      Rajoitettu käyttöoikeus / Restricted access / Tillgången begränsad
    • 3D-Printed Microscope Accessory: Affordable Technology for Efficient Diagnostics 

      Addy-Tayie, Nicholas (2019)
      3D-printing technology has evolved over the years to accommodate devise application areas. With 3D-printing, accessories for enhancing the efficient operation of microscope in studying and diagnosing diseases such as malaria ...
    • Action plan for new way to operate in manufacturing and pre-assembly 

      Lehtinen, Marjo (2023)
      The objective of the study is to establish an action plan for a new way to operate in manufacturing and pre-assembly in the case company. The case company had recognized a challenge in constantly changing markets and the ...
    • An entropy-based analysis of financial competitiveness of Nordic manufacturing firms 

      Petrov, Stefan (2021)
      Financial competitiveness is an essential part of the health and growth of firms. However, it is a relatively new phenomenon and is not yet well-researched. In this regard, the current study investigates whether the financial ...
    • Capital budgeting plan for case company 

      Liukkonen, Arttu (2021)
      This thesis was commissioned by an anonymous Pirkanmaa-based manufacturing company. Its objective was to form a capital budgeting plan for a new factory and research, which manufacturing line inefficiencies affect the ...
    • Current technology of manufacturing and its applicability for prototyping: a study of manufacturing methods 

      Westerlund, Samuel (2024)
      This thesis investigates modern manufacturing methods from a prototyping perspective to understand their selection process. Prototype building is a complex process, with the optimal method varying based on the product's ...
    • Design and manufacturing of a Formula Student composite chassis 

      Mononen, Jussi (2023)
      The purpose of this thesis was to design and manufacture a new chassis for Tampere Formula Student’s formula-style competition vehicle. The development of a new vehicle concept necessitated a corresponding revision of the ...
    • Design and Manufacturing of Modern Injection Moulding Tools Utilizing Stereolithography 

      Irjala, Franz (2024)
      Traditional steel tools for injection moulding are complex and expensive. Studies have suggested short run moulds can be made cost-efficiently with stereolithography (SLA). Technology company Formlabs recommends their ...
    • Design for manufacture and assembly of a novel resolver 

      Badura, Hannes (2022)
      The changes towards electrification in the industry and vehicle domain is followed by an increasing number of control systems for electric motors. The need for electrical drives pared with the increasing requirement of ...
    • Design of a wire electric discharge machine 

      Ampuja, Roni (2021)
      Tässä opinnäytetyössä suunniteltiin pienikokoinen ja edullinen kipinälankasaha, jota voi hyödyntää esimerkiksi vino- ja suorahampaisten hammaspyörien prototyyppivalmistuksessa ja yksittäistuotannossa. Kipinälankasahat ovat ...
    • Designing and implementing a carrying device for the Smart Factory in the Kosmos Lab 

      Szafraniec, Szymon (2023)
      The focus of this thesis was on the feasibility of using additive manufacturing to create a pallet that could facilitate workpieces in the Festo Smart Factory training kit. To achieve this, the original pallet provided by ...
    • Designing for Manufacturing on a Desktop FDM 3D Printer : designing a 3D printable DIY ceramics extruder 

      Nikkilä, Lilja (2024)
      This thesis delves into the realm of industrial design, specifically focusing on optimizing designs for desktop FDM 3D printers. The thesis explores strategies aimed at maximizing the benefits of FDM 3D printing. There ...
    • DFMA in Product Development 

      Therman, Anton (2020)
      This thesis is to study the possibilities to implement Design for Manufacturing and Assembly methods into K. Hartwall’s product development. This study has been executed as a case study and one of K. Hartwall’s products ...
    • Eco-friendly trainer 

      Poliakov, Valentin Jr (2021)
      The thesis presents a final project for the Mechanical engineering degree consisting of 15 ECTS. The topic of this thesis is an eco-friendly trainer, it consists of the following aspects, which have to be reviewed and ...
    • Filament production and application for wood based PLA 

      Dietmeier, Andreas (2024)
      3D printing as an alternative to conventional manufacturing methods, and its advantages in design freedom, customization options and ease of use, experienced a rise in popularity in the last decade. With fused filament ...
    • Flexible System for Production 

      Delander, Dima (2020)
      Manufacturing Execution System (MES) is designed to optimize the execution of manufacturing operations and to improve production output. The main goal of the manufacturing execution system is to ensure the correct execution ...
    • Identifying Strengths and Opportunities for Development in the Supply Chains of Plant-based FMCGs 

      Zamora-Mesén, David (2020)
      Shifting consumer behaviour towards food is having a significant impact globally. While there is an upward trend in consumption of plant-based food in western countries, increasing levels of affluence in developing countries ...
    • IZOD Impact strength test device 

      MUGENYI, ISAAC (2019)
      The idea of this thesis to design and assemble the different manufactured components into an Impact Strength Testing Device (Izod). The machine will have four major com-ponents to it; frame, clamp, pendulum hammer and the ...
    • Lean Production Scale-up: how a startup can scale the manufacturing of physical product innovation. 

      Taponen, Ilkka (2022)
      Tämä konstruktiivinen tutkimus keskittyy sellaisten startup -yritysten liiketoimintaympäristöön, joilla on fyysinen tuoteinnovaatio. Tutkimus keskittyy erityisesti tuotantokapasiteetin kasvattamiseen tässä kontekstissa. ...
    • Manufacturing Large Titanium Parts 

      Nissilä, Jesse (2023)
      Opinnäytetyön aiheena on tutkia vaihtoehtoisia valmistusmenetelmiä erään huvijahdin kantosiivekkeen saranalle. Nykyisin, sarana valmistetaan titaanista jyrsimällä. Valmistus on hidasta, kallista, sekä valmistuksesta aiheutuu ...