Haku
Viitteet 21-30 / 499
Realizing the bending stiffness of steel beam with additional downstand profiles
(2019)
The objective of the research was to determine the influence of additional steel elements to the bending stiffness of a steel member at the erection stage. Also the aim of the study was to consider different designs of ...
Sokkelielementin suunnitteluohje
(2019)
Tämän opinnäytetyön tarkoituksena oli tuottaa sokkelielementeille suunnitteluohje, jonka avulla kyseisten elementtien suunnittelu olisi helpompaa erityisesti uusille ja kokemattomammille suunnittelijoille. Lisäksi ohjeen ...
Calculation and analyzing of braces connections
(2019)
The main purpose of the thesis was to calculate and analyze five the most common for Russian design types of steel brace joints according to Russian norms. The research has been performed for roll-welded rectangular hollow ...
Distortional buckling of cold-formed steel member
(2019)
The main purpose of the thesis was to accumulate and analyze knowledge about the distortional buckling of cold-formed steel member and to determine the behavior of different dimensions of cross-sectional during distortional ...
Study of urban designs and planning for pedes-trian bridges and overpasses
(2019)
The aim of the study was to explore and analyse planning, design and other so-lutions for the pedestrian bridges and overpasses in the urban areas, which would improve their efficiency and social value.
The data for this ...
Yhteen suuntaan kantavan teräsbetonilaatan mitoitus eurokoodin mukaan
(2019)
Tässä opinnäytetyössä tarkasteltiin yhteen suuntaan kantavan teräsbetonilaatan mitoitusta eurokoodin mukaan. Työn tavoitteena oli luoda järjestelmä ja työkalut alustavan suunnittelun helpottamiseksi. Työkaluina tilaajayritykselle ...
Modern technologies in renovation and restoration cases
(2019)
The objective of the study was to analyse topical issues and their solutions by using modern technologies and new methods in renovation and restoration cases for an optimization of the process of managing a project on all ...
Ylläpitomalli kiinteistönhoidon näkökulmasta
(2019)
Tämä tutkimus tehtiin YIT Suomi Oy:n tarpeesta löytää käyttöä tietomalleille ylläpidossa. Teoreettisena viitekehyksenä käytettiin alan kirjallisuutta. Ajankohtaisuutensa vuoksi lähteissä havaittiin eroavaisuuksia riippuen ...
Pintabetonilattiatöiden laadunvarmistus
(2019)
Opinnäytetyön tarkoituksena oli pintabetonilattiatöiden laadunvarmistus. Laadunvarmistuksessa käytettiin Congrid-ohjelmistoa, johon dokumentoitiin laadunvarmistukseen sisältyvät tehtäväsuunnitelmat ja tehdyt tarkastuspohjat. ...
Strength and building physics analysis of the composite timber beam
(2019)
The main purpose of the thesis was to produce a technical sheet and excel sheets for determining the span length of the Sapisol beams for a roof structure according to Russian norms. The secondary aim was to calculate the ...