Haku
Viitteet 1-7 / 7
Evaluation of Insulation Monitoring Devices in an Isolated DC System
(2021)
This Bachelor’s thesis has been done on behalf of Wärtsilä Research & Development for the team Testing & Validation. The thesis’s purpose was divided into two main objectives: evaluating a suiting Insulation Monitoring ...
sWOIS Reporting System Development
(2021)
This Bachelor’s thesis was done on behalf of the Plant Automation department of Wärtsilä Finland Oy. The goal of this thesis was to create instructions and training material for the use of the reporting solution Dream ...
HMI Configuration of a Substation
(2021)
This thesis was made in cooperation with VEO Oy. The purpose of this thesis was to test a program called Zenon by creating an HMI of a substation. The configuration process of the HMI is explained and described.
The ...
Analysis of a Wärtsilä power plant control system network layout
(2022)
This thesis work is based on writing a document on how Wärtsilä's power plant automation layout works. The document contains how the automation components are connected and what standards and communication protocol Wärtsilä ...
Improvement Suggestions for a Load Bank Control System
(2023)
This thesis made for Wärtsilä Finland Oy concerns the load bank system at the engine laboratory in Vaasa. The purpose of the work was to investigate the problem with the existing system, which is mainly the difference in ...
SCADA Development with OPC UA Standard Practical : Practical study of developing a SCADA system in an HMI control and establishing communication to a server using OPC UA protocols
(2023)
In the industrial automation sector, there is great variability of industrial components of different brands to perform the same action. However, there is a tendency in the industry to work only with a single brand despite ...
Exploring Anomaly Detection in Building Automation Through Machine Learning Techniques
(2024)
The purpose of this thesis was to analyze and improve anomaly detection for ventilation processes in building automation. The final goal of the thesis was to develop an anomaly detection method that was more accurate than ...






