KoulutusalaOpinnäytetyötElektroniikka

    • Review of Data Converters 

      Poudel, Arjun (2021)
      The goal of this report is to review different types of electronic data converters developed till now. The report also goes through working and characteristics of those converters in brief. To support the review, a ...
    • RFID based Anti-theft System for Metropolia UAS Electronics laboratories 

      Weldemedhin, Desta (Metropolia Ammattikorkeakoulu, 2016)
      The aim of this thesis is to study different types of RFID based anti-Theft system implementation suitable for Metropolia Electronics laboratory environment to deter theft taking into account several installation requirements. ...
    • RFID Based Coupon Management 

      Ghebreyesus, Mahdere Yoseph (Metropolia Ammattikorkeakoulu, 2015)
      The radio frequency identification project was carried out at ITSC plc in Ethiopia. The host who involves in oil and gas distribution use barcode for tracking activity. The drawbacks of barcode for instance, lack of memory ...
    • RFID Tag + Reader 

      Gesese, Derej (2021)
      This thesis focuses on the development of a prototype RFID system project using 13.56MHz frequency band and a passive RFID system. This RFID thesis aims to give an understanding of the operation about the RFID technology ...
    • RFID Tag Identification and Display : Prototype of a Tag ID Reading System 

      Zhu, Hao (2021)
      Radiofrequency identification (RFID) is a kind of contact-less Internet of things information exchange technology, which has been widely used in people's daily life and modern scientific and technological production as a ...
    • RFID-Lock with Face-Recognition 

      Rasmussen, Matias (2022)
      The objective of the project was to build and design a prototype of a face-recognising RFID locking system, using RFID rings, to provide a smoother and more secure entry of any pathway. From hardware point of view, the ...
    • RFID-tunnisteen kehittäminen 

      Poikola, Sami (Metropolia Ammattikorkeakoulu, 2011)
      Insinöörityössä perehdyttiin UHF-alueen RFID-järjestelmien toimintaan valmistamalla Metropolia Ammattikorkeakoululle useita 868 MHz:n RFID-tunnisteita käytettäväksi RFID-tekniikan opintojakson laboratoriotöissä. Lisäksi ...
    • Ricoh-monitoimilaitteiden huolto 

      Phan, Nam (Metropolia Ammattikorkeakoulu, 2009)
      Insinöörityön aihe on Ricoh-monitoimilaitteiden huolto. Työn tarkoituksena oli laatia huolto-opas henkilölle, joka ei ole tehnyt vastaavanlaista työtä aikaisemmin. Työssä selvitettiin monitoimilaitteiden toimintaa, lähinnä ...
    • ROV, Remote Operated Vehicle 

      Patiris, Ioannis (Metropolia Ammattikorkeakoulu, 2015)
      The purpose of this thesis is to show the basic principles of a Remote Operated Vehicle. The aim is also to document in detail how a small scale remote operated vehicle is constructed from the start. This thesis provides ...
    • Röntgenlaitevalmistuksen loppukokoonpanon ongelmatilanteiden tutkimus 

      Mäkinen, Vesa (Metropolia Ammattikorkeakoulu, 2014)
      Insinöörityössä tutkittiin röntgenlaitteen loppukokoonpanossa esiintyviä häiriöitä, niiden alkuperää ja parhaita ratkaisukeinoja. Lopullisena päämääränä oli selvittää, voiko kyseistä työvaihetta mitata standardiajoilla ja ...
    • Safety System for Material Handling Vehicle prototype 

      Pham, Tai (2019)
      The goal of this project was to design a safety system for Material Handling Vehicle (MHV) prototype, which defines a safety distance that can change depending on the moving speed. The system will stop a prototype from ...
    • Safety System in Construction Industry : A protection system preventing fatal injuries by excavators in construction sites 

      Vo, Huynh (Metropolia Ammattikorkeakoulu, 2017)
      The purpose of this study was the implementation of an automatic protection system for workers working near excavators, which is identified as one of the targeted hazards and causes for fatal injuries in construction ...
    • Safety Testing for USB Charger Direct Plug-in Units 

      Ali, Mohamed (2024)
      The goal of this thesis study was to assess the critical safety issues in USB chargers by carrying out different testing methods to identify potential safety flaws that could lead to electric shock, fire, or other hazards. ...
    • SELV-liitäntälaitteen turvallisuustestaus 

      Henriksson, Minna (2024)
      Insinöörityössä tehtiin turvallisuustestaus liitäntälaitteelle. Turvallisuustestaus on viranomaisen tilaama testaus, jossa keskitytään standardin vaatimuksista niihin, jotka ovat merkittävimpiä käyttäjäturvallisuuden ...
    • SensorTag-anturipakan käyttö lintujen pesinnän seurannassa 

      Lojander, Mika (Metropolia Ammattikorkeakoulu, 2017)
      Insinöörityön tarkoituksena oli testata Texas Instrumentin valmistaman SensorTag CC2650STK -kehitysalustan ominaisuuksia ja soveltuvuutta lintujen pesinnän seurantaan linnunpöntössä. SensorTagille tehtävissä mittauksissa ...
    • Serverless IoT Platform 

      Alatalo, Aleksi (2020)
      Tämän projektin tavoitteena oli suunnitella ohjelmisto arkkitehtuuri IoT datan keräys järjestelmälle. Järjestelmän vaatimuksina oli olla pilvi pohjainen, tietoturvallinen, helposti määritettävä ja tukea dynaamista ...
    • Shuttle Box Design 

      Thapa, Anil (Metropolia Ammattikorkeakoulu, 2018)
      The main objective of this study was to design a shuttle box for inhibition testing on rodents, such that as a mouse enters the box, it should experience a different intensity of current shocks for a different period of ...
    • Simulation of Automatic Cut-Off 12V Battery Charger 

      Karna, Nikita (2019)
      The objective of this project was to simulate a charger for 12V battery which will have the function to automatically cut-off the charging when the battery is fully charged. When the battery is fully charged to its capacity, ...
    • Simulator of the resistive temperature sensor 

      Languev, Oleg (2019)
      The given work represents the development of the simulator of resistance temperature sensors of two types: PT100 and PT1000. The purpose is the simulation of changing temperature for EKE Electronics. Ltd. temperature ...
    • Simulointiympäristö langattomalle ajoneuvonseurantajärjestelmälle 

      Tiainen, Kauko (Metropolia Ammattikorkeakoulu, 2009)
      Insinöörityössä suunniteltiin ja rakennettiin simulointiympäristö langattomalle ajoneuvonseurantajärjestelmälle. Simulointiympäristöä tullaan käyttämään asiakkaan tilaamassa ajoneuvonseurantajärjestelmän seurantalaitteen ...