KoulutusalaOpinnäytetyötElektroniikka

    • The Feasibility of a Heated Box for Clothing Items 

      Sammy, Michael Justin (2023)
      This study concerns the feasibility of a heated box for clothing items, as a precursor to a heated closet. Suitable materials for the box are examined, along with the resistive heating elements (RHEs). Namely: a parallel ...
    • The Impact Of Loop Filter In Phase Locked Loop 

      Kwak, MyoungJun (2019)
      Phase Lock Loop is one of the most essential techniques today and it is used for many different purposes. Typical cases are frequency synthesizer, radio receiver, clock recovery and FM demodulation. Especially as a frequency ...
    • The Passive Mixer Design 

      Liu, Li (2023)
      The Frequency translates in a system, the specifications of the frequency translation are formed by the nonlinear device, which is the frequency mixer. The three types of mixers are in three performance levels, which are ...
    • The Reliability Study of Red Phosphorus Containing Insulation of a DC plug 

      Korniushyna, Yuliia (2020)
      This Bachelor’s Thesis is a report on the preparation for and practical implementation of the reliability study of red phosphorus containing DC plug’s insulation. KaVo Kerr had received some seven-year-old DC plugs containing ...
    • Thrust Meter Error Analysis 

      Hokkanen, Leevi (2021)
      This study examines measurement error of a device which measures model rocket motor thrust. This measurement device is designed as a personal project, and it will be used to test performance and consistency of model rocket ...
    • Tietoliikennetekniikan opetuslevyn kehittäminen 

      Kauppinen, Henri (Metropolia Ammattikorkeakoulu, 2013)
      Tässä insinöörityössä oli tavoitteena kehittää XBee-radiomoduuleille alusta tietoliikennetekniikan opetukseen Metropolia Ammattikorkeakoulussa. Piirilevy suunniteltiin EAGLE-piirilevynsuunnitteluohjelmiston ilmaisella ...
    • Tilataideteoksen valaistuksen suunnittelu ja toteutus 

      Ryhänen-Lilley, Satu (Metropolia Ammattikorkeakoulu, 2009)
      Insinöörityön tavoitteena oli suunnitella ja toteuttaa valosysteemi tilataideteoksen osaksi. Taideteoksessa oli ryhmä luonnollisen kokoisia ihmishahmoja istumassa penkkiriveillä pimennetyssä huoneessa. Hahmojen kasvoja ...
    • Timer-Controlled 5 A Constant Current Source 

      Thapalia, Pratyush (2021)
      The main objective of this project was to build a constant current source with a 5 A output. The project expectation was to create a power source capable of delivering high current output, generating the necessary thermal ...
    • Transforming Google Home Mini into Three-Way Tabletop Acoustics 

      Vetyugov, Arthur (2024)
      Modern speaker systems have much wider functionality than their predecessors. With the advent of smart technologies, loudspeakers have become even more technically complex, but have lost a variety of form factors on markets. ...
    • Troubleshooting Current Unbalance Faults in the Drives Service Testing Area 

      Silén, Juho (2022)
      This thesis project was commissioned by ABB, a global manufacturer of frequency converters and electrical drives etc. The purpose of this thesis project was to alleviate the time and effort required to fix repeatedly ...
    • Tunable Microwave Phase Locked Oscillator : Phase Locked Loop Implementation 

      Omar, Ismael (Metropolia Ammattikorkeakoulu, 2015)
      The demand for high data rates and low power consumption has had a major impact on the design of RF frequency synthesis systems. The need for highly stable oscillators is one of the main driving force in most communication ...
    • Tuotantotestauksen mittausdatan analysointi 

      Järvinen, Tomi (Metropolia Ammattikorkeakoulu, 2009)
      Tässä insinöörityössä tutkittiin Fastrax Oy:n oman tuotantotestauksen tuottamaa mittausdataa, joka on tallennettu tietokantaan. Tarkoituksena oli selvittää, miten tietokantaan tehtäviä hakuja saataisiin tehokkaammiksi ja ...
    • Tuotantotestaus tilastollisen prosessinohjauksen näkökulmasta 

      Pelkonen, Matias (2022)
      Insinöörityössä suunniteltiin, kehitettiin ja valmistettiin tuotantotestausasema Vaisala Oyj:n erään tuotantolaitteen kokoonpanon avuksi. Työn tavoitteena oli suunnitella mahdollisimman hyvin prosessia tukeva järjestelmä, ...
    • Työajanseurantajärjestelmän lukija 

      Arttola, Risto (Metropolia Ammattikorkeakoulu, 2010)
      Insinöörityössä oli tavoitteena toteuttaa RFID-lukijalaite osaksi isompaa työajanseurantajärjestelmää. Työssä perehdyttiin standardiin ISO 14443, sekä integroidun HF-taajuudella toimivan lukijapiirin käyttöönottoon. Samalla ...
    • UHF Power Amplifier Evaluation 

      Väänänen, Ismo (2023)
      Modernien puolijohteiden saatavuus seuraa markkinoilla olevien tuotteiden elinkaaria. Elinkaarien lyhentyessä ovat komponentit saatavissa markkinoilta entistä lyhyempiä aikoja. Tämä on ongelmallista teollisuuselektroniikassa, ...
    • UHF-alueen RFID-tunnisteen prototyypin antennin suunnittelu, simulointi ja mittaaminen 

      Sirén, Karri (Metropolia Ammattikorkeakoulu, 2010)
      Insinöörityössä perehdyttiin UHF-alueen RFID-tunnisteen antennin suunnitteluprosessiin sekä mittaamiseen. Työn tavoitteina oli toteuttaa antenni, jota voitaisiin käyttää paristoavusteisessa UHF-alueen RFID-tunnisteessa ...
    • Ultra Low Cost Test Platform 

      Siitonen, Paavo (2022)
      The topic of this work was to design and implement an inexpensive test system for production testing of printed circuit boards. The system is designed to be manufactured simply and easily using commercially off-the-shelf ...
    • Ultraäänipesurin suunnittelu 

      Vaaksio, Juha (Metropolia Ammattikorkeakoulu, 2010)
      Insinöörityössä oli tavoitteena suunnitella pienen ultraäänipesurin käytännön toteutus. Pesuri päätettiin toteuttaa mikroprosessorin ympärille ja ultraäänikaiuttimien ohjaus toteuttaa puolikkaan H-sillan avulla. Sopivien ...
    • Utilization of Features and Resources for Double Conversion UPS Systems 

      Leoncini, Giorgio (2019)
      This study is based on double conversion UPS systems. Double conversion UPS units are complex equipment consisting of various electrical devices. UPS manufacturers provide documentation, manuals, and datasheets to cope ...
    • Vaakakeskusyksikön kehitysprojekti 

      Rönnqvist, Niklas (Metropolia Ammattikorkeakoulu, 2013)
      Tässä insinöörityössä on esitelty vaakakeskusyksikön tuotekehityksen vaiheita. Työssä rakennettiin jatkokehityksen kohteena olevan Scalex 2200 uusi kehitysversio prototyyp-piasteelle. Työssä on esitelty alalla ja yrityksessä ...