Haku
Viitteet 1-10 / 21
Artificial Intelligence in 3D Printing : Real-time 3D printing control
(Yrkeshögskolan Arcada, 2018)
Artificial Intelligence (AI) is the leading field of science nowadays. Machines can learn and complete tasks independently. Additive manufacturing (AM) is still a developing technology. However, 3D printing is much more ...
Rapid prototyping: Creating a minimum viable product using a single-board microcontroller
(Yrkeshögskolan Arcada, 2018)
Detta slutarbete undersöker ifall produktutvecklingsteorin ”minimum viable product”, som oftast används inom programvaruutvecklingsindustrin, kan används för att utveckla fysiska produkter. En litteraturöversikt görs över ...
Photoelastic Stress Analysis of Polyethylene Terephthalate
(Yrkeshögskolan Arcada, 2018)
Photoelasticity is an experimental stress/strain-analysis method. This technique is based on the photoelastic effect which is a change in the optical indicatrix with mechanical stress. A polariscope is an instrument used ...
Recycling of HDPE from MSW waste to 3D printing filaments
(Yrkeshögskolan Arcada, 2018)
This thesis investigates the suitability of Fortum CIRCO® HDPE for fused deposition modelling (FDM). Fortum CIRCO® HDPE is recycled high-density polyethylene sourced from municipal solid waste, provided by Fortum Waste ...
Self-healing elastomers : A comparison of methods
(Yrkeshögskolan Arcada, 2018)
Self healing is used in biological systems found in nature. Man made materials however do not usually have the capability of self healing. Self healing can be found in a variety of materials with polymers being one of the ...
Fiber fraction in woven structures
(Yrkeshögskolan Arcada, 2018)
The purpose of this thesis is to study the effect on fiber volume fraction due to yarn-spacing in fiber-reinforced composites. Fiber volume fraction is the fractional amount of fiber in a composite. The volume of fiber as ...
Verkningsgrad i sportbågar
(Yrkeshögskolan Arcada, 2018)
Slutarbetet handlar om att undersöka verkningsgraden i olympiska recurve-pilbågar. På 1920-talet började man undersöka pilbågen från en matematisk synvinkel. Det finns olika typer av pilbågar beroende på vilken form de har ...
MANUFACTURING OF HDPE PIPES. A CASE STUDY IN SETI PLASTICS, NEPAL
(Yrkeshögskolan Arcada, 2018)
This study aims to analyse the needs of process of producing HDPE (high quality density polyethylene) pipes in developing countries and investigate their current state of product’s mechanical properties such as strength, ...
Dielectric Properties of Laminating Resin
(Yrkeshögskolan Arcada, 2018)
Resin has been used in industries because of different essence. The main objective of the thesis was to develop a module to study the dielectric constant change during wetting and curing and to study if the wetting of the ...
A Comparative Analysis of 3D Printers and Printing Materials for Art Designers in China
(Yrkeshögskolan Arcada, 2018)
In China, the group composed of art designers is becoming one of the biggest communities using 3D printing technology for their work. By analysis of 3D printing related technology, performance and cost performance factors ...