Nosto-ohjeiden teko ja siihen liittyvä kehitystyö
Hirvikoski, Eero (2019)
Hirvikoski, Eero
2019
Kaikki oikeudet pidätetään
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201903294011
https://urn.fi/URN:NBN:fi:amk-201903294011
Tiivistelmä
Tämä opinnäytetyö tehtiin Steerprop Oy:lle Raumalla, joka valmistaa laivojen propulsiolaitteita. Tarkoituksena oli laatia lainsäädännön ja työturvallisuuden kannalta selkeät, ajantasaiset sekä päivitetyt nosto-ohjeet standardilaitteille. Nosto-ohjeita hyödyntää niin kokoonpano kuin muutkin osapuolet, joille ne luovutetaan. Erityisesti ohjeet on kuitenkin tarkoitettu yrityksen omaan käyttöön kokoonpanoa varten.
Ohjeet laadittiin olemassa olevaan materiaaliin ja kokoonpanon vaiheisiin ja nostoihin käytännössä perehtymällä sekä haastatteluja tekemällä. Lähteinä toimivat muun muassa Steerpropin sisäiset tietokannat. Ohjeet laadittiin lainsäädännön ja työturvallisuusmääräyksien vaatimusten mukaan. Ohjeiden tekoon käytettiin muun muassa SOLIDWORKS – ohjelmistoa.
Aiheeseen liittyviä käsitteitä ovat muun muassa: meriteollisuus, kokoonpano, nostot, työturvallisuus ja laatu. Työssä käsitellään aluksi yritystä ja sen valmistamia laitteita. Teoriaosuus käsittelee nostotyötä ja siihen liittyvää lainsäädäntöä peilaten nostoihin ja nostolaitteisiin. Tämän lisäksi käsitellään nostoapuvälineitä, Lean-periaatteetta ja turvallisuutta. Lopuksi analysoidaan yrityksen nostoja, jonka jälkeen laitteille laadittuja nosto-ohjeita ja kehityskohteita.
Opinnäytetyö saavutti sille asetetut tavoitteet ja nosto-ohjeet yleisimmille nostoille saatiin tehtyä. Yrityksessä on tarkoitus jatkaa nosto-ohjeiden päivitystä myös isommille laitteille. This thesis was written for the company Steerprop Ltd. at Rauma producing propulsion equipment for the vessels. My purpose was to create clear and up-to-date lifting instructions for standard equipment, also following the legislation and creating working safety. The lifting instructions can be used as well by the composition as the other working partners receiving them. Mainly the instructions are, however, meant for the company's own use helping composition.
The instructions were made by studying the already existing material and the composition and lifting phases in practice as well as making interviews, using for example the internal database of Steerprop as source. The instructions were created according to the requirements of the legislation and the working safety, using for example the SolidWorks Software.
The concepts related to the subject are among others: Marine industry, composition, lifting, working safety and quality. The thesis first deals with the company and the equipment it produces. The theory consists of lifting work and legislation related to it, reflecting to lifting and the lifting instruments. In addition to this, lifting tools, the Lean principle and safety are dealt with. Finally, the ways of lifting in the company are analyzed, after which the lifting instructions for the instruments and the targets for development are dealt with.
The dissertation achieved its goals, and the lifting instructions for the most common lifting operations were created. The company is planning to continue the instruction updating also for the bigger equipment.
Ohjeet laadittiin olemassa olevaan materiaaliin ja kokoonpanon vaiheisiin ja nostoihin käytännössä perehtymällä sekä haastatteluja tekemällä. Lähteinä toimivat muun muassa Steerpropin sisäiset tietokannat. Ohjeet laadittiin lainsäädännön ja työturvallisuusmääräyksien vaatimusten mukaan. Ohjeiden tekoon käytettiin muun muassa SOLIDWORKS – ohjelmistoa.
Aiheeseen liittyviä käsitteitä ovat muun muassa: meriteollisuus, kokoonpano, nostot, työturvallisuus ja laatu. Työssä käsitellään aluksi yritystä ja sen valmistamia laitteita. Teoriaosuus käsittelee nostotyötä ja siihen liittyvää lainsäädäntöä peilaten nostoihin ja nostolaitteisiin. Tämän lisäksi käsitellään nostoapuvälineitä, Lean-periaatteetta ja turvallisuutta. Lopuksi analysoidaan yrityksen nostoja, jonka jälkeen laitteille laadittuja nosto-ohjeita ja kehityskohteita.
Opinnäytetyö saavutti sille asetetut tavoitteet ja nosto-ohjeet yleisimmille nostoille saatiin tehtyä. Yrityksessä on tarkoitus jatkaa nosto-ohjeiden päivitystä myös isommille laitteille.
The instructions were made by studying the already existing material and the composition and lifting phases in practice as well as making interviews, using for example the internal database of Steerprop as source. The instructions were created according to the requirements of the legislation and the working safety, using for example the SolidWorks Software.
The concepts related to the subject are among others: Marine industry, composition, lifting, working safety and quality. The thesis first deals with the company and the equipment it produces. The theory consists of lifting work and legislation related to it, reflecting to lifting and the lifting instruments. In addition to this, lifting tools, the Lean principle and safety are dealt with. Finally, the ways of lifting in the company are analyzed, after which the lifting instructions for the instruments and the targets for development are dealt with.
The dissertation achieved its goals, and the lifting instructions for the most common lifting operations were created. The company is planning to continue the instruction updating also for the bigger equipment.