- Selaus nimekkeen mukaan Yrkeshögskolan Novia

    • Auditering av kundnöjdheten under en fordonsskadeprocess 

      Strang, Aleksi (2023)
      Detta arbete behandlar en auditering av kundnöjdheten under en fordonsskadeprocess. Arbetets beställare var Lokaltapiola Österbotten och uppgiften bestod av forskning i kundnöjdheten i form av intervjuer, samt kvalitetsg ...
    • Auditering av Yrkeshögskolan Novia 

      Lindholm, Mats; Andersson, Örjan (Nationella centret för utbildningsutvärdering, 2019)
      SAMMANDRAG Beslutet av sektionen för utvärdering av högskolorna: Auditeringen är godkänd. Kvalitetsstämpeln är i kraft till och med 23 januari 2025 Auditeringsgruppens omdöme för utvärderingsområdena I-III: I: En ...
    • Auf der Suche nach dem Flow : Wenn die Produktion von selbst entsteht? 

      Kelm, Susanna (Yrkeshögskolan Novia, 2017)
      Nach einigen stressigen Theaterproduktionen wollte ich wieder einmal den Spaß und das Glücksgefühl beim Theatermachen erleben, was mich dazu veranlasste, das Phänomen „Flow“ praktisch, ebenso wie theoretisch zu erforschen. ...
    • Auktoriserad bokföring: Vad innebär det att vara en auktoriserad bokföringsbyrå? 

      Tuominen, Julia (2022)
      Detta examensarbete handlar om auktorisering av bokföringsbyråer, vad det innebär, hur den upprätthålls samt vilken nytta den ger bokföringsbyråer. I arbetet presenteras Ekonomiadministrationsförbundet i Finland rf i samband ...
    • Aurora Falls : a film by Carolin Koss 

      Koss, Carolin (Yrkeshögskolan Novia, 2011)
      Aurora Faller Som mitt examensarbete gjorde jag en 9 minuter lång film vid namn “Aurora Faller, jag skrev och regisserade. Det handlar om en 12 årig flicka, Aurora, som hittar sig själv fängslad i en tom simbassäng. ...
    • AutoCAD Add-on Program Instructions for the Wärtsilä Electrical & Automation Department 

      Söderbacka, Rasmus (2024)
      This thesis documents the creation of a guideline for employees at the Electrical and Automation Engineering Department at Wärtsilä Power Supply Customer Delivery. The manual also serves as documentation for the additional ...
    • Automated BCF Data Extraction For BIM QC Communication 

      Romero, Antonio (2019)
      According to multiple studies, communication in the AEC industry is a large, evident problem that should be addressed in order to minimize errors and maximize overall quality. Simultaneously, the AEC industry is taking a ...
    • Automated Guided Vehicles - Investment and Implementation 

      Björk, Alexander (2022)
      This thesis was written for Wärtsilä Oyj, which has made an investment of over 200 million euros in a technology center called Smart Technology Hub (STH) in Vaskiluoto, Vaasa. Wärtsilä has said that STH is a place for ...
    • Automated smoke testing with Selenium 

      Donalds, Emanuel (2021)
      The goal of this thesis was to design and implement a browser based automated test suite. The project was done for Crosskey Banking Solution, aiming to reduce time consuming manual testing and improve confidence when ...
    • Automatic GUI testing on embedded display module 

      Österberg, Tobias (Yrkeshögskolan Novia, 2014)
      This thesis is written for Platform Software, A&C, R&D, 4stroke, Ship Power, Wärtsilä Finland Oy during the summer of 2014. This thesis is about automatic GUI testing and how this can be implemented on embedded systems. ...
    • Automatic Route Planning and Calculation based on S-100 for Autonomous Vessels Navigation 

      Karamanoglou, Georgios (2022)
      Automatic Route Planning and Distance Calculation can be further developed by using the same factors as used in Route Planning by a Navigator while using the new Hydrographic S-100 Standards. These can be used to make this ...
    • Automatic Testing of a CANopen Node 

      Liang, Hui (Yrkeshögskolan Novia, 2013)
      This Bachelor’s thesis was commissioned by TK Engineering Oy in Vaasa. The goals of the thesis were to test a prototype CANopen node, called UWASA Node for conformance to the CiA 301 standard, and to develop the automatic ...
    • Automation and Electrical Planning for Ammonia Implementation to Engine Test Cell 

      Holmnäs, Rasmus (2023)
      What modifications are needed to start running an existing engine test cell on Ammonia gas from an automation perspective? This thesis aims to cover what things need to be considered from an automation and safety perspective. ...
    • Automation med Arduino och Raspberry Pi 

      Gottberg, Richard (Yrkeshögskolan Novia, 2016)
      För att lära mig mera om öppenhårdvaran Arduino och Raspberry Pi så har jag utfört ett projekt där ett klot hålls balanserat på en platta med automation. I projektet har jag använt mig av en Raspberry Pi som med en webbkamera ...
    • Automation Of A Solar Panel Test-Rig 

      Treviño Quintillà, Marc; Zubieta Mor, Ion (2020)
      The aim of this thesis is to construct a research tool for automatized tests on photovoltaic panels. The purpose is to create an instrument which enables the comparison of different types of solar panels in a controlled ...
    • Automation of routine tasks with PowerShell 

      Renkonen, Dennis (2020)
      This thesis describes a process of automating routine tasks using tools such as PowerShell. The ground work was done during my internship for Wärtsilä where I worked on Wärtsilä’s DCM365 product which is built on Microsoft ...
    • Automationsplanering av avrullning 

      Remesaho, Niko (2022)
      Detta examensarbete har gjorts på uppdrag av Mirka Ab Oy i Jeppo. Mirka tillverkar slipmaterial, slipmaskiner samt polermedel och polermaskiner för nationella och internationella kunder. Företaget fokuserar främst på export. ...
    • Automatiserad hantering av inköpsfakturor: En handbok till framtiden för ekonomiförvaltningen i Företag X 

      Lövdahl, Johan (2020)
      Processautomation med hjälp av robotik och maskininlärning är ett hett ämne i de flesta branscher idag, så är fallet även i ekonomiförvaltningsbranschen. Författaren har på sin arbetsplats medverkat i arbetet med ...
    • Automatiserad montering av axel och täckbricka 

      Lahti, Marko (Yrkeshögskolan Novia, 2013)
      Försäljningen av hjulserien Tango vid Manner har ökat markant under de senaste åren, och behovet av automatisering vid monteringen har blivit stor. Examensarbetet behandlar planering av en automatiserad monteringstation ...
    • Automatiserat installationsskript för Sopimus Pro 

      Åkerblom, Mats (Yrkeshögskolan Novia, 2013)
      Uppgiften för arbetet var att utveckla ett automatiserat installationsskript som automatiskt och utan användarens inblandning installerar Sopimus Pro-systemet på en dator med Windows som operativsystem. Sopimus Pro är ...