Haku
Viitteet 1-10 / 46
Study of the Curing Process of CFRP by Means of Electricity : Heating of the Carbon Fiber Reinforced Polymer (CFRP) during the curing process by conducting electricity through the fibers (Baltic Yachts)
(Yrkeshögskolan Novia, 2016)
This thesis is part of my double degree studies on Energy and Environmental Engineering by Novia University of Applied Sciences, from Vaasa, Finland, and Mechanical Engineering by the University of Lleida, from Lleida, ...
En jämförande livscykelanalys för avfallsinsamling : studien jämför två olika sorteringssystem på Stormossens område
(Yrkeshögskolan Novia, 2011)
Det här ingenjörsarbetet jämför miljöpåverkan mellan två olika sorteringssystem för Stormossens område. I alternativ 1 som används i dagens läge sorteras avfallet som köksavfall och grovavfall. I alternativ 2 sorteras ...
Quantitative Characterization of Biogas Quality : A Study of Biogas Quality at Stormossen Oy
(Yrkeshögskolan Novia, 2016)
This Bachelor’s thesis describes biogas as a sustainable biofuel and a realistic alternative to fossil fuels, such as gasoline and diesel. In this work the quality of biogas, produced at Stormossen Oy waste treatment plant, ...
Hydrogen as a Fuel in Maritime Applications : A Study on Implementing Hydrogen as a Fuel Source
(Yrkeshögskolan Novia, 2016)
The thesis is divided in two main parts. The first part features an explanation of hydrogen, its characteristics and the different generation processes to produce it. The second part is the main part of the project. Firstly, ...
Modular Infrastructures for Residential Areas : Investigating the possibility of having the MIRA system in the Urban and Rural Areas of Nepal.
(Yrkeshögskolan Novia, 2017)
With increase in global population the demand for a simple yet effective energy system is slowly growing. Especially in the case of developing countries, a good and optimal energy system could work to enhance the lives of ...
Effect of Pre and Post-Heat Treament on the Heat-Affected-Zone (HAZ) of Austenitic Stainless Steel
(Yrkeshögskolan Novia, 2017)
Stainless Steel is an important class of engineering alloys which are iron-base alloys grouped as iron-chromium-nickel alloys used in both wrought, cast and fabricated form for a wide range of applications and in many ...
Kvantitativa vätskefasmätningar i rötningsprocessen med FT-IR/ATR : Framställning av kalibreringsdata för att möjliggöra beräkningar av kvantitativa modeller för bestämning av processparametrar i rötningsprocessen.
(Yrkeshögskolan Novia, 2014)
I projektarbetet presenteras kvantitativa modeller, baserade på FT IR mätningar, för att bestämma processparametrar i en anaerob rötningsprocess. Rötningen gjordes i bioreaktorer placerade i yrkeshögskolan Novias laboratorium ...
Skumningsproblem vid rötning : en undersökning om orsaker, problem och åtgärder samt praktiska försök
(Yrkeshögskolan Novia, 2013)
Skumning utgör ett av de vanligaste och allvarligaste problemen vid rötning. Trots att rötning är en noga studerad metod, som kan användas både för att återvinna avfall som energi och minska på användningen av fossila ...
Future Local Gas Infrastructure : Vaasa Region
(Yrkeshögskolan Novia, 2017)
Vaasa Region is working on building and developing a biogas-based economy, with the help of natural gas as a backup fuel. From previous studies done, lack of infrastructure and gas competence have been cited as the biggest ...
Exoskeleton: Prototype design
(Yrkeshögskolan Novia, 2016)
The design projected in this document has features specifications of an exoskeleton structure with loads operation finality. The entire structure is divided into three major parts: the lower body, the chest, and the arms. ...