Sähköautojen lataustolppien standardien mukainen valmistus, testaus ja niiden merkintä, sekä ohjekirjojen ajantasaisuus
Oinonen, Jani (2020)
Oinonen, Jani
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202002262796
https://urn.fi/URN:NBN:fi:amk-202002262796
Tiivistelmä
Opinnäytetyössä tutkitaan yleisesti sähköautojen tekniikkaa ja niiden historiaa. Selvitetään eri lataustapoja, sekä niihin liittyvää teoriaa ja tutkitaan dynaamisen kuormanhallinnan, sekä varttitaseeseen siirtymisen vaikutusta sähköautojen latauksessa.
Esitellään Satmatic Oy:n tuotteita sähköajoneuvon lataukseen, sekä käydään läpi latauslaitteiden ominaisuuksia. Tutkitaan lataustolppien valmistukseen, sekä tarkastukseen liittyviä standardeja sekä siihen kuuluvia mittauksia ja mittauspöytäkirjoja.
Selvitetään CE-merkinnän vaatimuksia ja sen tuomia haasteita latauslaitteiden dokumentointiin. Suunnitellaan yhdelle asiakkaan tuotteista käyttö- ja asennus ohje, joka esitellään asiakkaalle opinnäytetyön lopuksi. In this thesis, electric cars technology and their history are investigated. The thesis will investigate different charging types and related issues and learning about dynamic charge controlling and 15minute imbalance settlement period and their effect on charging of electric cars.
This thesis introduces Satmatic Oy products in the charging of electric cars and their features. Standards of charging poles manufacturing, testing, measuring and measurement protocol are investigated.
In this thesis, CE-marking requirements and challenges related to documentation with it are investigated. There is a planned use- and installation manual to one of our customers products and by the end of this thesis, it will be presented to them.
Esitellään Satmatic Oy:n tuotteita sähköajoneuvon lataukseen, sekä käydään läpi latauslaitteiden ominaisuuksia. Tutkitaan lataustolppien valmistukseen, sekä tarkastukseen liittyviä standardeja sekä siihen kuuluvia mittauksia ja mittauspöytäkirjoja.
Selvitetään CE-merkinnän vaatimuksia ja sen tuomia haasteita latauslaitteiden dokumentointiin. Suunnitellaan yhdelle asiakkaan tuotteista käyttö- ja asennus ohje, joka esitellään asiakkaalle opinnäytetyön lopuksi.
This thesis introduces Satmatic Oy products in the charging of electric cars and their features. Standards of charging poles manufacturing, testing, measuring and measurement protocol are investigated.
In this thesis, CE-marking requirements and challenges related to documentation with it are investigated. There is a planned use- and installation manual to one of our customers products and by the end of this thesis, it will be presented to them.