Näytä suppeat kuvailutiedot

Correction to: The influence of stiffener geometry on flexural properties of 3D-printed polylactic acid (PLA) beams

Gebrehiwot, Silas Z.; Espinosa-Leal, Leonardo; Eickhof, J. N.; Rechenberg, L. (2020)
dc.contributor.authorGebrehiwot, Silas Z.
dc.contributor.authorEspinosa-Leal, Leonardo
dc.contributor.authorEickhof, J. N.
dc.contributor.authorRechenberg, L.
dc.date.accessioned2020-09-15T11:20:51Z
dc.date.available2020-09-15T11:20:51Z
dc.date.issued2020
dc.identifier.urihttp://www.theseus.fi/handle/10024/345391
dc.language.isoeng
dc.publisherSpringer
dc.rightsCC BY-NC-ND 4.0
dc.titleCorrection to: The influence of stiffener geometry on flexural properties of 3D-printed polylactic acid (PLA) beams
dc.typepublication
dc.identifier.urnURN:NBN:fi-fe2020091169368
dc.type.versionfi=Publisher's version|sv=Publisher's version|en=Publisher's version|
dc.contributor.organizationfi=Yrkehögskolan Arcada|sv=Yrkehögskolan Arcada|en=Arcada University of Applied Sciences|
dc.subject.ysoflexure
dc.subject.ysostrain
dc.subject.ysoelasticity (physical properties)
dc.subject.ysostiffness
dc.subject.ysomaterials handling
dc.subject.ysomaterialbehandling
dc.subject.ysostyvhet
dc.subject.ysoelasticitet
dc.subject.ysoböjlighet
dc.subject.ysoansträngning
dc.type.otherParallel Publications
dc.type.okmfi=A1 Alkuperäisartikkeli tieteellisessä aikakauslehdessä|sv=A1 Originalartikel i en vetenskaplig tidskrift|en=A1 Journal article (refereed), original research|
dc.format.pagerange11 sidor
dc.relation.ispartofjournalProgress in additive manufacturing
dc.relation.issn2363-9512
dc.relation.issn2363-9520
dc.relation.doi10.1007/s40964-020-00149-z
dc.okm.selfarchivedfi=Rinnakkaistallennettu|sv=parallellpublicerad|en=self-archived version|
dc.source.identifier31378


Tiedostot

Thumbnail
Nimi:
Prog_Addit_Manuf.pdf
Koko:
1.826Mt
Formaatti:
PDF
Kuvaus:
Prog_Addit_Manuf.pdf
Avaa tiedosto

Viite kuuluu kokoelmiin:

Näytä suppeat kuvailutiedot