Liukuportaiden käsikaiteen fotonidesinfiointiyksikön muotoiluprosessi
Juuse, Janne (2019)
Juuse, Janne
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020121428134
https://urn.fi/URN:NBN:fi:amk-2020121428134
Tiivistelmä
Tämä opinnäytetyö toteutettiin Led Tailor INNOVA7IONin liukuportaiden käsikaiteen fotonidesinfiointiyksikön tuotekehityksen käynnistämiseksi. Opinnäytteen tarkoituksena on selvittää, millainen liukuportaiden käsikaiteen fotonidesinfiointiyksikkö on sekä miten muotoilulliset menetelmät palvelevat toimeksiantajayritystä tuotekehityksessä ja osana laajempaa kokonaisuutta. Tavoitteena on luoda fotonidesinfiointiyksikön suunnitelma, joka toimii alustavana osana suurempaa tuotekehityspolkua ja pohtia laitteelle muita mahdollisia käyttökohteita.
Tietoperusta opinnäytteeseen on rakennettu muotoiluprosessin ja laitteen toiminnan sekä sen ympäristötekijöiden kartoittamisen ympärille. Opinnäytteen aihetta lähestytään muotoilullisten tutkimusmenetelmien keinoin. Koko työ on rakennettu muotoilullisen menetelmämallin ympärille ja sen toimintaa tuetaan yksittäisiä tutkimusmusmenetelmiä käyttäen sekä kartoitus- ja analysointimenetelmin. Menetelmien avulla on selvitetty käyttäjien toimintaa, ympäristöä ja yrityksen osaamista, minkä tuottaman tiedon kautta analyysit on toteutettu. Työssä on käytetty lähteinä alan kotimaista kirjallisuutta ja kansainvälisiä verkkolähteitä.
Muotoiluprosessin tuloksena syntyi piirokset selvittämään, millainen laite on liukuportaiden käsikaiteen fotonidesinfiointiyksikkö. Laite on suunniteltu kokonaisuus huomioiden. Tämä lisää laitteen perusteltavuutta. Suunnitelman toteutustason tulee palvella sen roolia osana tuotekehitystä. Opinnäyte osoittaa fotonidesinfiointiyksikön ja sen osien sopivuuden muihin käyttötarkoituksiin tarpeiden kohdatessa laitteen ominaisuudet. Laite itsessään palvelee käyttäjiään, mutta ei havainnollista desinfiointivaikutusta tai olemassa oloaan. Opinnäyte osoittaa, että muotoilu kannattaa liittää osaksi yrityksen tuotekehitystä sen kehittämiseksi. Tuotekehitys voi yksinkin olla laadukasta, mutta muotoilun ja sen sisältämien menetelmien avulla päästään vielä parempiin ja perusteltuihin tuloksiin. This thesis was carried out to launch the product development of the Led Tailor INNOVA7ION’s escalator handrail photon disinfection unit. The purpose of the thesis was to find out, what kind of device the escalator’s handrail photon disinfection unit is and how the design methods serve the client company in product development and as part of a wider entity. The aim is to create a photon disinfection unit plan that serves as a preliminary part of a larger product development path, and to consider other possible uses for the device.
The knowledge base for the thesis was built around the design process and the operation of the device and the mapping of its environmental factors. The subject of the thesis was approached by means of design research methods. The material has been collected in a variety of ways, using domestic literature and international online sources, as well as mapping and analysis methods. The mapping has been used to identify users’ actions, the environment and the company’s expertise, through which the analyzes have been carried out.
In the design process, it is discovered what kind of device is the escalator handrail photon disinfection unit and what impact the design process has on company. The device is designed with the big picture in mind. This
increases the justification of the device. The implementation level of the plan should serve its role as part of product development. The thesis demonstrates the suitability of the photon disinfection unit and its components for other uses, when the needs of the uses met benefits of device. The device itself serves its users, but does not have a way to demonstrate the disinfecting effect or presence of unit it self. It is advisable to incorporate design into the company’s product development to improve it. Product development alone can be high quality, but with design and the methods it contains can achieve even better results.
Tietoperusta opinnäytteeseen on rakennettu muotoiluprosessin ja laitteen toiminnan sekä sen ympäristötekijöiden kartoittamisen ympärille. Opinnäytteen aihetta lähestytään muotoilullisten tutkimusmenetelmien keinoin. Koko työ on rakennettu muotoilullisen menetelmämallin ympärille ja sen toimintaa tuetaan yksittäisiä tutkimusmusmenetelmiä käyttäen sekä kartoitus- ja analysointimenetelmin. Menetelmien avulla on selvitetty käyttäjien toimintaa, ympäristöä ja yrityksen osaamista, minkä tuottaman tiedon kautta analyysit on toteutettu. Työssä on käytetty lähteinä alan kotimaista kirjallisuutta ja kansainvälisiä verkkolähteitä.
Muotoiluprosessin tuloksena syntyi piirokset selvittämään, millainen laite on liukuportaiden käsikaiteen fotonidesinfiointiyksikkö. Laite on suunniteltu kokonaisuus huomioiden. Tämä lisää laitteen perusteltavuutta. Suunnitelman toteutustason tulee palvella sen roolia osana tuotekehitystä. Opinnäyte osoittaa fotonidesinfiointiyksikön ja sen osien sopivuuden muihin käyttötarkoituksiin tarpeiden kohdatessa laitteen ominaisuudet. Laite itsessään palvelee käyttäjiään, mutta ei havainnollista desinfiointivaikutusta tai olemassa oloaan. Opinnäyte osoittaa, että muotoilu kannattaa liittää osaksi yrityksen tuotekehitystä sen kehittämiseksi. Tuotekehitys voi yksinkin olla laadukasta, mutta muotoilun ja sen sisältämien menetelmien avulla päästään vielä parempiin ja perusteltuihin tuloksiin.
The knowledge base for the thesis was built around the design process and the operation of the device and the mapping of its environmental factors. The subject of the thesis was approached by means of design research methods. The material has been collected in a variety of ways, using domestic literature and international online sources, as well as mapping and analysis methods. The mapping has been used to identify users’ actions, the environment and the company’s expertise, through which the analyzes have been carried out.
In the design process, it is discovered what kind of device is the escalator handrail photon disinfection unit and what impact the design process has on company. The device is designed with the big picture in mind. This
increases the justification of the device. The implementation level of the plan should serve its role as part of product development. The thesis demonstrates the suitability of the photon disinfection unit and its components for other uses, when the needs of the uses met benefits of device. The device itself serves its users, but does not have a way to demonstrate the disinfecting effect or presence of unit it self. It is advisable to incorporate design into the company’s product development to improve it. Product development alone can be high quality, but with design and the methods it contains can achieve even better results.