"computer-aided design" - Selaus asiasanan mukaan Yrkeshögskolan Arcada
Viitteet 1-9 / 9
-
Characterizing the influence of Temperature on the short-term mechanical properties of 3D printed PLA.
(2024)This thesis investigates the influence of temperature on the mechanical properties of Polylactic Acid (PLA) manufactured using 3D printing, with a particular focus on tensile modulus and yield strength. The study adheres ... -
Cost efficient design for welded brackets : for Wärtsilä engines
(2022)This bachelor’s thesis was made for Wärtsilä Finland Oy, Marine Power Solutions. The aim of the thesis was to examine cost-efficient solutions for welded brackets for Wärtsilä engines. Welded brackets are common components ... -
Design of Machine Elements
(2023)Machine elements are important components that allow for the running of machinery. These include a range of components broadly categorized as “universal elements” such as springs, bearings, chains, gears, pins, belts, bolts ... -
Motion study of a robotic arm
(2023)This thesis is written for the University of Applied Sciences Arcada. The aim for the thesis was to build a robotic arm kit, upload a code do the build, model the robot using SolidWorks, perform three cases of motion ... -
Optimization in Product Design with CAE
(2024)Before a design or structure is manufactured in real life, the virtual model needs to undergo a series of tests and analyses. One of these tests and analyses is to predict if the design or structure’s mass can be optimized ... -
Product design of an automatic spice crusher
(2024)This thesis aims to design, manufacture and analyze an automatic spice crusher. The thesis describes the work done towards achieving the goal of manufacturing a functional automatic spice crusher following the guidance of ... -
Ski Mechanism for a Stroller
(2023)Strollers are baby carriages on wheels, this presents a problem in winter climates where there is snow which interferes with the wheels on the stroller and makes it more difficult to move. The goal behind this degree thesis ... -
The influence of infill direction on the low cycle fatigue performance of 3D printed PLA polymer.
(2022)Purpose of the thesis is to find out the infill direction on the low cycle fatigue performance of 3D printed PLA polymer. ISO 527 1B selects as a standard to prepare the sample, which was designed by SolidWorks software. ... -
Universal Testing Machine Frame Deformation
(2021)Concerning the Universal Testing Machine, this thesis aims to develop an alternative frame model for bending test. The design needs to be simple, increase the operator safety and fulfill criteria of bending standards. The ...








