KoulutusalaMetropolia AmmattikorkeakouluElektroniikka
Viitteet 21-40 / 338
-
Arduino Cloud -käyttöopas opiskelijoille
(2023)Tämä opinnäytetyö tutkii Arduino Cloudia mittaustietojen näyttämiseen pilvessä ja tarjoaa ohjeet Arduino Cloudin käyttämiseen. Arduino on avoimen lähdekoodin elektroniikan suunnittelualusta. Se on erittäin suosittu sen ... -
Asiakaspalautustuotteiden vianetsintä- ja korjausohje
(2023)This thesis aims at developing troubleshooting work instructions to support assemblers constructing control and measurement devices at Bluefors Oy. The need for this thesis came from organizational chance to move work ... -
ASSCON VP3000 -höyryfaasiuunin juotosprosessin evaluointi
(Metropolia Ammattikorkeakoulu, 2014)Tämä insinöörityö tehtiin Hyrles Oy:n elektroniikkaosastolle Lohjalla. Työn tavoitteena oli tutkia ASSCON VP3000 -höyryfaasiuunin juotosprosessin vakautta ja juotettavan kappaleen massan vaihtelun vaikutusta juotosprofiiliin ... -
Assembling and Exploring a Small Radio Telescope
(Metropolia Ammattikorkeakoulu, 2014)The subject of this study is a Small Radio Telescope (SRT), which is a radio astronomy kit for radio astronomers and students. In the course of this study, the SRT was set up and made available to the Helsinki Observatory. The ... -
Augmented Reality for Exercises for Elderly People
(2020)Augmented Reality (AR) physical training may have advantages over regular exercise training among elderly people. So exercise with AR tools can help to decrease the chance of falling and increase personal health. However, ... -
Augmentoidun todellisuuden lääketieteelliset sovellukset
(Metropolia Ammattikorkeakoulu, 2013)Insinöörityössä käsiteltiin augmentoidun todellisuuden lääketieteellisiä sovelluksia. Työn tavoitteena oli esittää mahdollisimman laaja katsaus augmentoituun todellisuuteen ja erityisesti sen hyödyntämismahdollisuuksiin ... -
Automated Aircraft Identification by Machine Vision
(Metropolia Ammattikorkeakoulu, 2017)The main goal of this study was to develop an OCR solution for an automated identification of aircrafts at Helsinki-Malmi airport with the application of machine vision. Cognex In-sight vision system was chosen as a ... -
Automated Car Parking
(2019)The aim of this IOT based project was to design and build a prototype of an automated parking system which will provide a solution for the problems encountered in today’s parking lot management systems. To complete this ... -
Automated Harness Verification System
(2023)The purpose of this thesis is to design an automated harness verification system. The system will be used by ICEYE’s assembly, integration, and testing engineers to verify most types of cables before they are integrated ... -
Automated System for IEC 60598-1 Endurance Test
(2019)The purpose of this project was to create an automated test system for a luminaire endurance test, described in an IEC 60598-1 standard. The test system includes a laptop that utilizes local network, test software made ... -
Automated Testing Process for D-Fend Water Trap
(Metropolia Ammattikorkeakoulu, 2017)In this thesis testing methods were explored and developed in order to implement automated product testing. General Electric (GE) Healthcare Finland is designing a new, fully automated, assembly line and this project was ... -
Automotive Fuse Circuit Board
(2021)The main goal of the work encompassed in this thesis was to answer a real need for a product from Sensible 4 Oy, which would allow for a faster and easier alternative to troubleshoot issues, while at the same time reducing ... -
Bassokitaran virittimen toteutus mBed-mikrokontrollerin avulla
(Metropolia Ammattikorkeakoulu, 2015)Työn tavoitteena oli suunnitella ja ohjelmoida laite, joka auttaisi käyttäjää kielisoittimen, erityisesti bassokitaran, virittämisessä. Toissijaisena tavoitteena oli löytää FFT:lle vaihtoehtoinen menetelmä signaalin ... -
Bat Detector
(Metropolia Ammattikorkeakoulu, 2018)Bats are found all around the world and study of bats is important as they are the part of the ecosystem we live in. For research and study, bats are to be located and for that, bat detectors are needed. The main target ... -
Battery Powered Crossover for In-Ear Monitors
(Metropolia Ammattikorkeakoulu, 2016)The goal of this thesis was to design and implement a portable active three way audio crossover for use with high end earphones. This crossover system is housed in its own separate enclosure and is connected between an ... -
Beacon Reader Simulator Software Implementation on Raspberry Pi
(Metropolia Ammattikorkeakoulu, 2018)The purpose of this project was to design and implement a device capable of simulating beacon reader functionality. Beacon reader simulator can communicate with Automatic Selective Door Operation System (ASDO) and send a ... -
The Behaviour and Frequency-Dependent Parameters of the CNT-Covered Films in the Frequency Range of 50MHz – 6.2GHz
(Metropolia Ammattikorkeakoulu, 2016)Theoretical basis for the frequency-dependent parameters measurement and calculation for the thin film conductive materials is described. The single layer and multilayer CNT-covered film disks were installed across the ... -
Behaviour Recognition in an Elevator Using Kinect Sensor
(2021)Increasing population and urbanization has led to widespread use of elevators in buildings. There is always a concern associated with the safe usage of elevators. Manual video monitoring is often slow and ineffective when ... -
Biometriset Tunnistusjärjestelmät
(Metropolia Ammattikorkeakoulu, 2009)Tässä insinöörityössä selvitettiin biometristä tunnistusta seuraavien piirteiden avulla: sormenjälki, kämmen, kasvot, puhe, iiris, retina, käsialadynamiikka ja näppäimistödynamiikka. Työssä myös esiteltiin biometrisen ... -
Bluetooth Low Energy -anturien tuen kehitys IoT-laitteeseen
(2022)Tämän insinöörityön tavoitteena oli kehittää sulautettua Linux-käyttöjärjestelmää käyttävään esineiden internet -laitteen ohjelmistoon tuki Bluetooth Low Energy -antureille. Laitteessa oli valmiina tarvittava Bluetooth-s ...