Haku
Viitteet 1-10 / 14
Introduction to Industry 4.0 and Data Visualization in Embedded IoT System
(2020)
The project goal concerns designing an IoT system for Industrial Management and Smart Home Application, which acquires various sensors’ data, such as temperature, humidity, and pressure, visualizes them on the line chart, ...
Timer-Controlled 5 A Constant Current Source
(2021)
The main objective of this project was to build a constant current source with a 5 A output. The project expectation was to create a power source capable of delivering high current output, generating the necessary thermal ...
Design of a 5 A Constant Current Source
(2021)
This work presents the development of three different current source circuits providing constant 5 A output. The purpose of this project is to provide enough thermal power to cut surgical sutures of lifeline thread.
This ...
Phase Locked Loop (PLL)
(2021)
The main purpose of this project was to design a PLL circuit which can be locked at 1GHZ with four factors of frequency division (10, 20, 40 and 80). Phase Locked Loops (PLLs) are feedback systems that generate phase-locked ...
Hardware Design for Head Impact Assessment in Contact Sports
(2019)
Head Impact Injuries have been the most common causes of Concussion in heavy contact sports. Concussion affects the brain, resulting impairment of neurological functions, and is usually under-reported or underestimated by ...
Milling Machine Validation through Microstrip Filter Manufacturing
(2022)
The milling machine at the Myyrmäki campus at Metropolia is used on a number of Engineering courses. Since there is no certainty about the precision of the aforementioned milling machine, it is unclear how much the production ...
Electronics Development of a Formula Type Steering Wheel
(2022)
The purpose of this thesis work was development of a circuit board for a new steering wheel design for Metropolia Motorsport, built on an earlier prototype made by Metropolia Motorsport. The circuit board has Bluetooth Low ...
Envelope Generator for Analog Synthesizer
(2022)
Työn tarkoituksena oli suunnitella verhokäyrägeneraattori analogiseen modulaarisyntetisaattoriin. Verhokäyrägeneraattori on tarkoitus liittää osaksi henkilökohtaista syntetisaattoriprojektia. Piirilevyn suunnittelu tehdään ...
1 GHz Power Rail Probe
(2023)
Työn tarkoituksena oli suunnitella edullinen oskilloskoopin anturi korkeataajuuksisten häiriöiden mittaukseen tasajännitelähteistä. Työssä käydään läpi suunnitteluprosessi ja kytkentäkaaviot esitetylle ratkaisulle, jonka ...
Automated Harness Verification System
(2023)
The purpose of this thesis is to design an automated harness verification system. The system will be used by ICEYE’s assembly, integration, and testing engineers to verify most types of cables before they are integrated ...