Haku
Viitteet 1-10 / 46
Intel Xeon Server CPU Maximum Wake Latency Measurement
(2019)
Modern CPUs implement mechanisms for managing power consumption when being idle by means of clock- or power-gating various internal blocks. These idle states are called "C-states". If a CPU is in an idle C-state to save ...
Timer-Controlled 5 A Constant Current Source
(2021)
The main objective of this project was to build a constant current source with a 5 A output. The project expectation was to create a power source capable of delivering high current output, generating the necessary thermal ...
Non-optical Hand Calibration for Smartwatch
(2021)
The purpose of this thesis work was to find an alternative method of watch hand calibration which would allow for optically intact watch face to be used in the product. Another goal was to improve the robustness for external ...
Further Development of Autonomous Drive-by-Wire Hardware
(2021)
The rise of modern society has seen a growth in autonomous vehicle technology. As an answer to harsh weather issues that hinder most driver-less vehicles, Sensible 4 creates autonomous solutions for all weather conditions. ...
Photodetector Amplifier and Measurement Setup Design
(2021)
Insinöörityö tehtiin Teknologian tutkimuskeskus VTT Oy:lle. Työn tarkoituksena oli mittausalustan suunnittelu uudentyyppiselle nanoteknologiaan perustuvalle valoanturille. Valoantureita käytetään laajasti esimerkiksi ...
Design of a 5 A Constant Current Source
(2021)
This work presents the development of three different current source circuits providing constant 5 A output. The purpose of this project is to provide enough thermal power to cut surgical sutures of lifeline thread.
This ...
Phase Locked Loop (PLL)
(2021)
The main purpose of this project was to design a PLL circuit which can be locked at 1GHZ with four factors of frequency division (10, 20, 40 and 80). Phase Locked Loops (PLLs) are feedback systems that generate phase-locked ...
Electronics Design in a Passive Speaker System
(2021)
The goal of this thesis project was to start the research and development of the electronics of a passive loudspeaker system. The project being started from scratch, many of the topics included in speaker design are not ...
Hand Position and Movement Acquisition System for a Wrist Based HMI
(2021)
The field of human-machine interfaces keeps evolving at a steady pace. In recent years gesture recognition has become an important focus of research. Most commercial applications of gesture recognition work with the help ...
Precise Positioning Concept and NTRIP Base Station
(2019)
The purpose of this project is to discuss basic idea of precise satellite positioning. When it comes to positioning area, GPS has been acknowledged to be the most popular concept. However, positioning signal is not simple ...