Haku
Viitteet 1-10 / 17
Developing a System Measuring Temperature Dependence of Photodetectors
(2020)
This thesis work was commissioned by Emberion Oy. A measurement system for investi-gating the temperature dependence of Emberion photodetectors was needed. The goal was to develop a system consisting of instruments, ...
Photodetector Amplifier and Measurement Setup Design
(2021)
Insinöörityö tehtiin Teknologian tutkimuskeskus VTT Oy:lle. Työn tarkoituksena oli mittausalustan suunnittelu uudentyyppiselle nanoteknologiaan perustuvalle valoanturille. Valoantureita käytetään laajasti esimerkiksi ...
Cost effective EC and pH measurements
(2020)
Oftentimes, it is difficult to find electrical conductivity and potential of hydrogen measurement sensors with PLC compatible interfaces at a low cost. The reason for this might be due to the fact that the companies producing ...
Smart Weather Station
(2021)
The biggest role of my project is to make a device that can gauge the temperature or the humidity of gardens or farms using sensors scattered all around them. Furthermore, the fundamental objective was to make a program ...
Temperature and Humidity Sensors Utilization in Automobile
(2021)
The goal of the thesis work was to implement and utilize sensory elements to measure and send information about the environment inside a particular vehicle, thus letting the user know to prepare for the travel by defogging ...
Smart Mirror with Object Measuring Functionality
(2022)
Mirror has always been an integral part of a person’s clothing choice. However, when it comes to information beyond visual appearance, we have to rely on archaic instruments to get our body measurements. The lack of these ...
Hardware Optimization of Automated Test Setup for Current and Piezo Measurements
(2023)
This thesis presents the optimization of an automated test setup’s hardware side. The purpose of the test setup is to confirm the functionality of firmware updates and modifications in Aito Interactive Oy products. The ...
Power Consumption Optimization and Measurement
(2021)
The project aimed to design a system that consumed power as optimized as possible. The main components of the system included two Xbees, an Arduino Micro; otherwise, there were also an LED and a resistor that supported the ...
Sleep Modes and Power Consumption of a Xbee
(2022)
The goal of the project was to build an embedded system and to measure difference in energy consumption between normal mode and sleep mode to prove the efficient reduction in consumption. The system was built with Xbee ...
Thrust Meter Error Analysis
(2021)
This study examines measurement error of a device which measures model rocket motor thrust. This measurement device is designed as a personal project, and it will be used to test performance and consistency of model rocket ...