Haku
Viitteet 1-10 / 19
IoT: Home Automation
(2019)
Thesis target is to present a cost reduced and flexible home control and monitoring system using Raspberry Pi and Blynk mobile application with IP connectivity, accessing and controlling devices and appliances remotely ...
Intel Xeon Server CPU Maximum Wake Latency Measurement
(2019)
Modern CPUs implement mechanisms for managing power consumption when being idle by means of clock- or power-gating various internal blocks. These idle states are called "C-states". If a CPU is in an idle C-state to save ...
Automated Car Parking
(2019)
The aim of this IOT based project was to design and build a prototype of an automated parking system which will provide a solution for the problems encountered in today’s parking lot management systems.
To complete this ...
Designing an Internet of Things Attack Simulator
(2019)
The goal of this thesis was to illustrate how a vulnerability in an Internet of Things device can lead to a Distributed Denial of Service (DDoS) attack. The main focus was Mirai, a malware that infected a large amount of ...
Design of the Lithium-ion Battery Pack Tester
(2019)
The goal of the work was to study several evaluation boards from Linear Technology and use them to design a simple Lithium-ion battery test system. A detailed study on them was done along with the search for new design ...
Weather Station using Particle Photon
(2019)
This project aimed to develop a functional prototype device to monitor the accurate and reliable environmental factors such as temperature and humidity remotely. In other words, the idea behind the development of this ...
Driverless for Racecar Implementations
(2019)
Autonomous cars are becoming a part of daily lives and changing the automobile. With these improvements, autonomy is making its way to motorsports.
With this in mind Formula Student opened a new type of competition for ...
Utilization of Features and Resources for Double Conversion UPS Systems
(2019)
This study is based on double conversion UPS systems. Double conversion UPS units are complex equipment consisting of various electrical devices. UPS manufacturers provide documentation, manuals, and datasheets to cope ...
Construction and Validation of Dew Point Probe Calibration Station
(2019)
The purpose of this study work is to construct and validate a calibration station for Vaisala oyj. The station will be used for calibrations of dew point measurement sensors produced by Vaisala. Customers will send their ...
Safety System for Material Handling Vehicle prototype
(2019)
The goal of this project was to design a safety system for Material Handling Vehicle (MHV) prototype, which defines a safety distance that can change depending on the moving speed. The system will stop a prototype from ...