Näytä suppeat kuvailutiedot

Pientalon jäykistävien pystyrakenteiden vertailu Excel-ohjelman avulla

Stenudd, Matias (2013)

dc.contributor.authorStenudd, Matias
dc.date.accessioned2013-06-05T08:22:25Z
dc.date.available2013-06-05T08:22:25Z
dc.date.issued2013
dc.identifier.uriURN:NBN:fi:amk-2013060512968
dc.identifier.urihttp://www.theseus.fi/handle/10024/62051
dc.description.abstractOpinnäytetyön aiheena oli laatia esimerkkilaskelma sekä Excel-ohjelma pientalon jäykistävien pystyrakenteiden vertailuun. Työn tavoitteena oli laatia Svapa Oy:lle helppokäyttöinen Excel-ohjelma, jolla voidaan helposti laskea ja vertailla yksinkertaisen pientalon pystyrakenteiden eri jäykistystapoja ja jonka avulla pystytään valitsemaan pientaloon oikeanlaiset jäykistävät rakenteet jo suunnittelun alkuvaiheessa. Työ aloitettiin tutustumalla aihetta käsitteleviin teoksiin, määräyksiin, standardeihin sekä esimerkkilaskelmiin. Työlle valittiin sopiva esimerkkikohde, johon mitoitettiin Mathcad-ohjelmalla jäykistävät rakenteet. Esimerkkilaskelman pohjalta laadittiin selkeä ja helppokäyttöinen Excel-ohjelma. Työ tehtiin suurimmalta osin RIL 205-1-2009 -julkaisun ohjeita sekä eri levyvalmistajien tyyppihyväksyntöjä noudattaen. Opinnäytetyön tuloksena saatiin helppokäyttöinen toimiva Excel-ohjelma, joka laskee pientalon levyjäykistykseen tarvittavat liitinvälit ja niiden käyttöasteet halutuilla levy-liitin-yhdistelmillä. Laskelmissa käytetään levyjäykistykseen Gyproc GTS 9- ja Knauf KXT 9 -tuulensuojakipsilevyjä, Suomen Kuitulevy Oy:n Runkoleijona ja Tuulileijona huokoisia tuulensuojalevyjä sekä 9 mm:n vanerilevyä. Ohjelma laatii levyjäykistyksen tuloksista selkeän vertailutaulukon, josta näkee nopeasti, minkälaisella levy-liitin-yhdistelmällä rakennus on mahdollista jäykistää. Tulevaisuudessa ohjelmaa on tarkoitus laajentaa kattamaan myös 2-kerroksisia sekä monimuotoisempia rakennuksia. Myös jäykistävän väliseinän mitoitus sekä jäykistävien seinien ankkurointi on tarkoitus lisätä ohjelmaan tulevaisuudessa.fi
dc.description.abstractThe subject of the thesis was to create an example calculation and Excel program for the comparison of the vertical structures which stiffen a detached house. The objective of the work was to create an easy-to-use Excel program to Svapa Ltd with which the different stiffening ways of the vertical structures of a simple detached house can be calculated and easily compared. The program also helps to choose the correct stiffening structures into a detached house already at the first stage of the design. The work was begun by becoming acquainted with works, regulations, standards and example calculations which deal with the subject. A suitable example target was chosen for the work in which the stiffening structures were dimensioned with a Mathcad program. Based on the example calculation a clear and easy-to-use Excel program was drawn up. The work was done by following the instructions of the standards and the different board manufacturers' type approvals. The result of this thesis is a handy Excel program which calculates the connector spaces required for the board stiffening of a detached house. The program also calculates their utilization rates on the desired board-connector combinations. In the calculations wind shield boards by Gyproc, Knauf, Runkoleijona and Tuulileijona are the used products and a plywood board. The program draws up a clear comparison table of the results of the board stiffening from which it is fast seen what kind of a board-connector combination it is possible to stiffen the building with. In the future it is intended to extend the program to cover bigger and more multiform buildings also. It is intended to be able to calculate the anchorage of the stiffening walls also with the program in the future.en
dc.language.isofin
dc.publisherOulun seudun ammattikorkeakoulu
dc.rightsAll rights reserved
dc.titlePientalon jäykistävien pystyrakenteiden vertailu Excel-ohjelman avullafi
dc.type.ontasotfi=AMK-opinnäytetyö|sv=YH-examensarbete|en=Bachelor's thesis|
dc.identifier.dscollection10024/2152
dc.organizationOulun seudun ammattikorkeakoulu
dc.subject.ysamitoitus
dc.subject.ysarakenteet
dc.subject.ysalaskentataulukot
dc.subject.ysatalonrakennus
dc.subject.ysarakennetekniikka
dc.subject.ysaExcel
dc.contributor.organizationOulun seudun ammattikorkeakoulu
dc.subject.keywordjäykistys
dc.subject.keywordlevyjäykistys
dc.subject.keywordExcel
dc.subject.keywordeurokoodi
dc.subject.specializationTalonrakennustekniikka
dc.subject.degreeprogramfi=Rakennus- ja yhdyskuntatekniikka|sv=Byggnads- och samhällsteknik|en=Civil and Construction Engineering|
dc.subject.disciplineRakennustekniikan koulutusohjelma


Tiedostot

Thumbnail

Viite kuuluu kokoelmiin:

Näytä suppeat kuvailutiedot