Planering av vibrationsmätningsutrustning för forskings- och utvecklingslaboratoriet
Jansson, Felix (2022)
Jansson, Felix
2022
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2022060916952
https://urn.fi/URN:NBN:fi:amk-2022060916952
Tiivistelmä
Detta examensarbete är utfört på uppdrag av Mirka Ab vid Power Tools-enheten. Mirka tillverkar olika produkter inom slipmaterialteknologi och är världsledande inom detta område. Power Tools-enheten är en del av forsknings- och utvecklingslaboratoriet där till exempel olika poler- och slipmaskiner utvecklas.
Syftet med detta examensarbete var att med hjälp av olika tekniska tillvägagångssätt utvärdera ett nytt vibrationsmätningssystem. Prioriteringen skulle vara på ett system med möjlighet att integreras med det redan existerande testramverket, vilket ger en effektiv rapportering och uppstart av mätningar som kan användas till HALT-tester och till hand-arm-vibrationsmätningar. Om tiden räckte till skulle även testramverket byggas upp och driftsättas i R&D-laboratoriet.
Examensarbetet gick ut på att planera och att jämföra olika tillvägagångssätt för problemet och att beställa in utrustningen som bestäms efter utvärdering av olika alternativ. Till arbetet hörde också att bekanta sig med vilka direktiv och standarder som är aktuella inom området.
I resultatet ges förslag till olika alternativ till lösningen och man märker snabbt att användning av en LabVIEW-miljö är det enklaste och bästa alternativet. Efter ett möte blev det bestämt att man börjar använda sig av en LabVIEW-miljö och att det beställs in de nödvändiga komponenter som behövs till denna lösning. Eftersom leveranstiderna var långa på dessa komponenter och att det inte fanns på plats, så blev det inget bygge av testramverket i samband med detta examensarbete. This bachelor’s thesis was conducted on behalf of Mirka Ab at the Power Tools- unit. Mirka produces different products within surface finishing technology and is a world leader within this branch. The Power Tools unit is a part of the research and development laboratory where for example different polishing and sander machines are being developed.
The purpose with this bachelor’s thesis was to evaluate different technical approaches for a new measurement system. The priority lies on a system with the possibility to integrate with the already existing test framework, and one that gives an efficient reporting and set-up of measurements that can be used for HALT-tests and hand-arm vibration measurements. If time permits the system shall be built and commissioned in the R&D laboratory.
The bachelor’s thesis is about planning and comparing different approaches for the problem and ordering the needed equipment which is determined after the evaluation of different approaches. It also belongs to the work to familiarize with what directives and standards apply to the specific area of work.
The result was given as suggestions for different approaches to the solution, but after a meeting it was decided to start using a LabVIEW environment and to order the needed components for this solution to work. Because the delivery time was very long on the needed hardware and there was none on site there was no time to build and commission the system during my bachelor’s thesis.
Syftet med detta examensarbete var att med hjälp av olika tekniska tillvägagångssätt utvärdera ett nytt vibrationsmätningssystem. Prioriteringen skulle vara på ett system med möjlighet att integreras med det redan existerande testramverket, vilket ger en effektiv rapportering och uppstart av mätningar som kan användas till HALT-tester och till hand-arm-vibrationsmätningar. Om tiden räckte till skulle även testramverket byggas upp och driftsättas i R&D-laboratoriet.
Examensarbetet gick ut på att planera och att jämföra olika tillvägagångssätt för problemet och att beställa in utrustningen som bestäms efter utvärdering av olika alternativ. Till arbetet hörde också att bekanta sig med vilka direktiv och standarder som är aktuella inom området.
I resultatet ges förslag till olika alternativ till lösningen och man märker snabbt att användning av en LabVIEW-miljö är det enklaste och bästa alternativet. Efter ett möte blev det bestämt att man börjar använda sig av en LabVIEW-miljö och att det beställs in de nödvändiga komponenter som behövs till denna lösning. Eftersom leveranstiderna var långa på dessa komponenter och att det inte fanns på plats, så blev det inget bygge av testramverket i samband med detta examensarbete.
The purpose with this bachelor’s thesis was to evaluate different technical approaches for a new measurement system. The priority lies on a system with the possibility to integrate with the already existing test framework, and one that gives an efficient reporting and set-up of measurements that can be used for HALT-tests and hand-arm vibration measurements. If time permits the system shall be built and commissioned in the R&D laboratory.
The bachelor’s thesis is about planning and comparing different approaches for the problem and ordering the needed equipment which is determined after the evaluation of different approaches. It also belongs to the work to familiarize with what directives and standards apply to the specific area of work.
The result was given as suggestions for different approaches to the solution, but after a meeting it was decided to start using a LabVIEW environment and to order the needed components for this solution to work. Because the delivery time was very long on the needed hardware and there was none on site there was no time to build and commission the system during my bachelor’s thesis.