Näytä suppeat kuvailutiedot

Planering av sälpinger

Aakula, Christian (2015)

dc.contributor.authorAakula, Christian-
dc.date.accessioned2015-06-03T06:35:47Z
dc.date.available2015-06-03T06:35:47Z
dc.date.issued2015-
dc.identifier.uriURN:NBN:fi:amk-2015060111717-
dc.identifier.urihttp://www.theseus.fi/handle/10024/95374
dc.description.abstractDetta examensarbete behandlar huruvida sälpingers fungerar i praktiken, vad det finns för alternativ samt exempel på hur en sälpinger kan byggas. En sälpinger är en liten krets som används i fiskenät eller vid fiskeodlingar för att hålla sälar borta. Syftet med detta arbete var att försöka utveckla en fungerande sälpinger som skulle kunna återanvändas, istället för att slängas då batterierna tagit slut. Detta arbete tar fram sätt att generera ljudbilder som antas skrämma sälar, med hjälp av en mikroprocessor samt med analog elektronik. Det tas också upp några olika sätt att försörja dessa med ström, samt ett exempel på högtalare som kan användas. Resultatet av detta examensarbete blev en mikroprocessor med två olika koder. Detta för att jämföra strömförbrukningen av processorn då man själv ställt in all hårdvara exakt som man vill ha den kontra då man har använt Arduinos egen kod. Även en krets med en 555 klocka har tagits fram för att generera frekvenser.sv
dc.description.abstractThis Bachelor’s Thesis covers whether seal pingers work or not, what possible alternatives to seal pingers there are and how a seal pinger could be created practically. A seal pinger is a device fishermen use in their fishing nets or in fish farms to keep seals away from the fish. The objective of this thesis is to create a working seal pinger with the possibility to recharge the power supply instead of having to discard the pinger when it is out of power. Several ways to generate different frequencies that supposedly scare seals are covered, both using a microprocessor and analogue technology. Ways to supply the circuits with power are also covered, and a possible buzzer that could be used has been found. The final result of this thesis is a microprocessor with two different codes. One solution uses only the exact hardware desired, while the other uses the standard hardware settings and is created with software coding only. The reason for this is to compare the power usage between the two solutions. A circuit with a 555 timer has also been created to generate frequencies.en
dc.language.isoswe-
dc.publisherYrkeshögskolan Novia-
dc.rightsAll rights reserved-
dc.titlePlanering av sälpingersv
dc.type.ontasotfi=AMK-opinnäytetyö|sv=YH-examensarbete|en=Bachelor's thesis|
dc.identifier.dscollection10024/2203-
dc.organizationYrkeshögskolan Novia-
dc.contributor.organizationYrkeshögskolan Novia-
dc.subject.keywordsälpinger-
dc.subject.keywordsälskrämma-
dc.subject.keywordfrekvens-
dc.subject.specializationAutomation-
dc.subject.degreeprogramfi=Sähkötekniikka|sv=Elektroteknik|en=Electrical Engineering|-
dc.subject.disciplineElektroteknik-


Tiedostot

Thumbnail

Viite kuuluu kokoelmiin:

Näytä suppeat kuvailutiedot