Protocol Implementation Using TI’s SimpliciTI Platform
Fang, Shanshan (2011)
Fang, Shanshan
Vaasan ammattikorkeakoulu
2011
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2011061412005
https://urn.fi/URN:NBN:fi:amk-2011061412005
Tiivistelmä
SYNC2SINK is a global synchronization protocol used for Wireless Sensor Net-work. The objective of this thesis is to implement SYNC2SINK protocol on the CC2510-based data gathering sensor network and mastering the radio interface.The project consists of two parts: framework design and protocol implementation. My work is to implement Data frame and Sync frame which designed by my teammate to our communication system by using SimpliciTI platform. Our designed communication systems consist of three parts: SINK, Node, and Sniffer. The achievement of SINK part is to broadcast Sync frame at 2.4 GHz pe-riodically and correctly received the data frame. The function of Node part is to hunt the Sync frame and send out the data frame through antenna. During this transmission the sniffer will capture and analysis all the frames from SINK and Node side. This thesis report describes the design and implantation of this communication system, and also analyzes the entire system by calculating the Packet lost rate, transmission speed, etc. After completed this project, I familiarized with embedded system programming, I understood the SYNC2SINK protocol, timing issue, collision avoidance. I be-lieved I am able to build an own designed Wireless sensor network in practical application.