Detonation thermal spraying process of metal-ceramic coating of the inner body of a regulating valve for maintenance of turbine condensate level in a deaerator for a nuclear power plant
Vinogradov, Andrey (2015)
Saimaan ammattikorkeakoulu
2015
Creative Commons Attribution-NonCommercial 1.0 Finland
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2015120419431
https://urn.fi/URN:NBN:fi:amk-2015120419431
Tiivistelmä
The objective of the research was to examine a process of metal ceramic detonation spraying, technology and realization of the procedure and its features for the given component.
The work was commissioned by main process engineer Shvedov N. G.
This study was carried out at the Center of Scientific-Technical Service "Prometey". The information was gathered from internal documentation of the enterprise, manuals, literature and by interviewing process engineers.
As a result of this thesis the detonation coating process was investigated for a particular unit – the regulating valve. All the stages and requirements were presented. The results can be applied to any detonation coating case or surface treatment matter where complex approach is necessary.
The work was commissioned by main process engineer Shvedov N. G.
This study was carried out at the Center of Scientific-Technical Service "Prometey". The information was gathered from internal documentation of the enterprise, manuals, literature and by interviewing process engineers.
As a result of this thesis the detonation coating process was investigated for a particular unit – the regulating valve. All the stages and requirements were presented. The results can be applied to any detonation coating case or surface treatment matter where complex approach is necessary.