3D printing: technology and processing
Kurinov, Ilya (2016)
Saimaan ammattikorkeakoulu
2016
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201605259625
https://urn.fi/URN:NBN:fi:amk-201605259625
Tiivistelmä
The objective of the research was to improve the process of 3D printing on the laboratory machine. In the study processes of designing, printing and post-print-ing treatment were improved. The study was commissioned by Mikko Ruotsalainen, head of the laboratory.
The data was collected during the test work. All the basic information about 3D printing was taken from the Internet or library.
As the results of the project higher model accuracy, solutions for post-printing treatment, printing of the standard parts and guidelines for the designing 3D printed objects were achieved. The results can be applied in the future printing processes on SUAS 3D printer.
The data was collected during the test work. All the basic information about 3D printing was taken from the Internet or library.
As the results of the project higher model accuracy, solutions for post-printing treatment, printing of the standard parts and guidelines for the designing 3D printed objects were achieved. The results can be applied in the future printing processes on SUAS 3D printer.