Distortional buckling of cold-formed steel member
Chernova, Anna (2019)
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201905149886
https://urn.fi/URN:NBN:fi:amk-201905149886
Tiivistelmä
The main purpose of the thesis was to accumulate and analyze knowledge about the distortional buckling of cold-formed steel member and to determine the behavior of different dimensions of cross-sectional during distortional buckling. The purpose was also to do some calculations of this phenomenon.
The first part of the thesis consists of general information about what distortional buckling actually is, definite paragraphs from Eurocode and some words about other types of buckling. The general part of the thesis contains calculations and analysis about distortional buckling of cold-formed steel member, summarized in a tabular form.
The information was gathered mostly from Eurocode, literature and different titles. Also some articles from the Internet were carried out.
The first part of the thesis consists of general information about what distortional buckling actually is, definite paragraphs from Eurocode and some words about other types of buckling. The general part of the thesis contains calculations and analysis about distortional buckling of cold-formed steel member, summarized in a tabular form.
The information was gathered mostly from Eurocode, literature and different titles. Also some articles from the Internet were carried out.