COMPARATIVE CHARACTERISTIC OF REPAIR (FINISHING) MATERIALS PRODUCED IN FINLAND
Putintseva, Maria (2011)
Putintseva, Maria
Saimaan ammattikorkeakoulu
2011
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2011090312836
https://urn.fi/URN:NBN:fi:amk-2011090312836
Tiivistelmä
The subject of the thesis is the comparison of finishing materials for repair. The thesis report was made for Mainfuse Oy, specialized on performing of repair works in Helsinki. The main sources are the information from the web-sites of the materials producers in Finland and Mainfuse Oy, also from the manuals and the textbooks of painting and wallpapering works.
In the first part of the thesis the paints and varnishes and the wallpapers produced by the biggest manufacturers in Finland were considered. The finishing materials were compared by cost, environmental safety, usability, resistance, etc, by the most important for repair characteristics. The second part of the thesis is the quality control guidance for decorating works, for painting by water and non-aqueous compositions and for wall pasting by rolled materials. The most common defects in the finishing works and their causes were considered. The repair works are carried out according to the MaalausRYL, the fourth part of the RYL Code of Building Practice in Finland. It is a manual of planning and performing finishing work of building surfaces, which is used by constructors and even on websites of the largest producers of materials to make the right selection of the products.
The found results are that choosing the materials for painting and wallpapering is complicated and based on specific knowledges and the guideline shows that the quality of finishing repair works depends on many things and have to be monitored very carefully.
In the first part of the thesis the paints and varnishes and the wallpapers produced by the biggest manufacturers in Finland were considered. The finishing materials were compared by cost, environmental safety, usability, resistance, etc, by the most important for repair characteristics. The second part of the thesis is the quality control guidance for decorating works, for painting by water and non-aqueous compositions and for wall pasting by rolled materials. The most common defects in the finishing works and their causes were considered. The repair works are carried out according to the MaalausRYL, the fourth part of the RYL Code of Building Practice in Finland. It is a manual of planning and performing finishing work of building surfaces, which is used by constructors and even on websites of the largest producers of materials to make the right selection of the products.
The found results are that choosing the materials for painting and wallpapering is complicated and based on specific knowledges and the guideline shows that the quality of finishing repair works depends on many things and have to be monitored very carefully.