Konsentraatin levityskaluston tuotekehitys
Parviainen, Joni (2020)
Parviainen, Joni
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020052614006
https://urn.fi/URN:NBN:fi:amk-2020052614006
Tiivistelmä
Opinnäytetyön aiheena oli kehittää konsentraatin levityskaluston prototyyppiä BioKymppi Oy:n toimesta. Kehitystyö aloitettiin, koska prototyypin toiminnassa havaittiin parannettavia toimintoja. Kehitystyössä käytettiin apuna systemaattisen suunnitteluprosessin VDI 2222 -mallia.
Kehitystyötä varten syvennyttiin suunnitteluprosessin eri vaiheisiin ja hankittiin tarvittavat taustatiedot prototyypistä sekä muista levittämiseen tarkoitetuista laitteista. Varsinainen kehitystyö aloitettiin suunnitteluprosessin mukaisesti ja työn aikana käytettiin useita suunnitteluprosessin työkaluja. Kehitystyö sisälsi paljon 3D-mallinnusta ja näiden mallien pohjalta tehtyjä valmistuskuvia.
Työn lopputuotteena saatiin kehitettyä järjestelmä, jonka levitysleveys oli prototyyppiä suurempi ja prototyypistä havaitut ongelmat oli otettu huomioon. Kehitetty järjestelmä olisi mahdollista kytkeä kasvinsuojeluruiskun puomistoon, jota käytettäisiin lietevaunun perässä. The subject of this thesis was to improve a prototype of concentrate’s spreading device by BioKymppi Oy. The defects of the prototype were basis for starting this development work. The aid of a systematic design process VDI 2222 was used in this development work.
Different steps of the design process were familiarized with and the necessary information about the prototype and other spreading devises was collected for this work. The actual development work started according to the design process and several tools of the process were used during the work. The development work included plenty of 3D-designing work and making of manufacturing drawings.
The final product of this development work was a system which has a larger spreading width than the prototype and the defects of the prototype were considered during the work. The developed system would be possible to attach to a plant protection spray which would be used behind a slurry tanker.
Kehitystyötä varten syvennyttiin suunnitteluprosessin eri vaiheisiin ja hankittiin tarvittavat taustatiedot prototyypistä sekä muista levittämiseen tarkoitetuista laitteista. Varsinainen kehitystyö aloitettiin suunnitteluprosessin mukaisesti ja työn aikana käytettiin useita suunnitteluprosessin työkaluja. Kehitystyö sisälsi paljon 3D-mallinnusta ja näiden mallien pohjalta tehtyjä valmistuskuvia.
Työn lopputuotteena saatiin kehitettyä järjestelmä, jonka levitysleveys oli prototyyppiä suurempi ja prototyypistä havaitut ongelmat oli otettu huomioon. Kehitetty järjestelmä olisi mahdollista kytkeä kasvinsuojeluruiskun puomistoon, jota käytettäisiin lietevaunun perässä.
Different steps of the design process were familiarized with and the necessary information about the prototype and other spreading devises was collected for this work. The actual development work started according to the design process and several tools of the process were used during the work. The development work included plenty of 3D-designing work and making of manufacturing drawings.
The final product of this development work was a system which has a larger spreading width than the prototype and the defects of the prototype were considered during the work. The developed system would be possible to attach to a plant protection spray which would be used behind a slurry tanker.