Teräsrakenneliitokset, mallintaminen ja FEM-analysointi
Laasanen, Santeri (2020)
Laasanen, Santeri
2020
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2020052614141
https://urn.fi/URN:NBN:fi:amk-2020052614141
Tiivistelmä
Opinnäytetyön tarkoituksena oli tehdä Tekla Structures -ohjelmaan teräsrakenteiden liitosmitoitusta varten liitoskirjasto, jonka avulla saataisiin teräsrakenteiden suunnittelusta ja mallintamisesta suunnittelijan kannalta helpompaa ja nopeampaa. Liitoskirjastoon sisällytettiin aluksi kolme teräsrakenteiden perusliitosta, mutta tulevaisuudessa komponenttia voidaan kehittää ja laajentaa useammille liitosvaihtoehdoille. Työn tilaajana on Sitowise Oy.
Liitokset laskettiin ensin käsin, jotta saatiin kattava ja selkeä ymmärrys liitoksen komponenteista ja niiden käyttäytymisestä. Liitoskirjaston tueksi SKOL-laskentapohjia apuna käyttäen tehtiin jokaisesta liitoksesta Excel-taulukointi, josta nähdään kaikkien liitoksien mitoittavat kapasiteetit, ruuvien koot ja määrät sekä hitsin koko.
Lopuksi yksi liitoksista mallinnettiin vielä IDEA StatiCa -ohjelmaan, jossa pystyttiin syventämään liitoksen tutkimista ja vertailemaa ohjelman mahdollisia eroja laskentatuloksissa sekä rakenteiden käyttäytymisessä. The purpose of the thesis was to make a jointlibrary to Tekla Structures for the joint dimensioning of steel structures, which would make the design and modeling of steel structures easier and faster for the designer. Initially, three basic joints for steel structures were included in the jointlibrary, but in the future the component can be developed and expanded for more joint options. The client of the work is Sitowise Oy.
Joints were first calculated by hand to provide a comprehensive and clear understanding of the joint components and their behavior. To support the jointlibrary, an excel spreadsheet was made for each joint using SKOL calculation template, showing the dimensioning capacities, bolt sizes and quantities, and the size of the weld for all joints.
Finally, one of the joints was modeled into the IDEA Statica program, where we were able to deepen the study of the joint and compare the possible differences in the calculation results and the behavior of the structures.
Liitokset laskettiin ensin käsin, jotta saatiin kattava ja selkeä ymmärrys liitoksen komponenteista ja niiden käyttäytymisestä. Liitoskirjaston tueksi SKOL-laskentapohjia apuna käyttäen tehtiin jokaisesta liitoksesta Excel-taulukointi, josta nähdään kaikkien liitoksien mitoittavat kapasiteetit, ruuvien koot ja määrät sekä hitsin koko.
Lopuksi yksi liitoksista mallinnettiin vielä IDEA StatiCa -ohjelmaan, jossa pystyttiin syventämään liitoksen tutkimista ja vertailemaa ohjelman mahdollisia eroja laskentatuloksissa sekä rakenteiden käyttäytymisessä.
Joints were first calculated by hand to provide a comprehensive and clear understanding of the joint components and their behavior. To support the jointlibrary, an excel spreadsheet was made for each joint using SKOL calculation template, showing the dimensioning capacities, bolt sizes and quantities, and the size of the weld for all joints.
Finally, one of the joints was modeled into the IDEA Statica program, where we were able to deepen the study of the joint and compare the possible differences in the calculation results and the behavior of the structures.