Auto agriculture irrigation tower system design
Nguyen, Tuan (2022)
2022
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-202205026838
https://urn.fi/URN:NBN:fi:amk-202205026838
Tiivistelmä
The objective of the thesis was to design integration of the auto irrigation system into the agriculture tower, which contributes to protecting the environment through reducing the consumption of water and fertilizer in the agriculture industry.
In general, the thesis focused on two main things: the design and manufacturing of the tower spare parts and the automation system design. The spare parts were drawn with draft, then it was adjusted until the component met requirement for planting space. The 3D-modeling and manufacturing drawing were edited by SOLIDWORKS program to optimize the space for planting and water circulation inside the tower. The automation irrigation system was designed based on the solenoid valve normally closed mechanism which was controlled by a circuit board and drive-by receiving the signal from soil moisture sensor. The research and design were sourced from internet data, books, and articles.
The result of the thesis showed the manufacturing method, the material selection of the tower, structure of the agriculture tower and how to combine the agriculture tower with the automation irrigation system.
In general, the thesis focused on two main things: the design and manufacturing of the tower spare parts and the automation system design. The spare parts were drawn with draft, then it was adjusted until the component met requirement for planting space. The 3D-modeling and manufacturing drawing were edited by SOLIDWORKS program to optimize the space for planting and water circulation inside the tower. The automation irrigation system was designed based on the solenoid valve normally closed mechanism which was controlled by a circuit board and drive-by receiving the signal from soil moisture sensor. The research and design were sourced from internet data, books, and articles.
The result of the thesis showed the manufacturing method, the material selection of the tower, structure of the agriculture tower and how to combine the agriculture tower with the automation irrigation system.