Accelerated Testing of Mirka Deros Speed Controller
Granholm, Conny (2018)
Granholm, Conny
Yrkeshögskolan Novia
2018
All rights reserved
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201805147865
https://urn.fi/URN:NBN:fi:amk-201805147865
Tiivistelmä
This Bachelor’s thesis was done for the Power Tools department at Mirka Ab. The aim of this thesis was to study different ways to accelerate the lifetime of the speed controller in the Deros sander and provide a standardized test method for accelerated testing. The reason for using a standardized test method is to compare earlier designs against new ones in the product development process. This test method will also reveal weaknesses earlier in the development phase.
The accelerating methods used were: constant stress, step stress and cyclic stress. All these tests were performed in an environmental chamber. The factors used for accelerating the product were temperature, humidity, vibration and overload.
The results show that it is possible to accelerate the lifetime of the speed controller in the Deros sander. A test proposal has also been made, describing how the standardized test method should be done. Detta examensarbete gjordes åt Power Tools avdelningen på Mirka Ab. Syftet med denna avhandling var att studera olika sätt att accelerera livstiden hos styrkortet i en Deros slipmaskin och att utforma en standardiserad testmetod för accelererad testning. Anledningen till att använda en standardiserad testmetod är för att kunna jämföra tidigare designer mot nyare i produktutvecklingsprocessen. Denna testmetod kommer också att kunna avslöja svagheter tidigare i utvecklingsfasen.
De använda accelerationsmetoderna var: konstant stress, stegstress och cyklisk stress. Alla dessa tester utfördes i ett klimatskåp. Faktorerna som användes för att accelerera produkten var temperatur, fuktighet, vibrationer och överbelastning.
Resultaten visar att det är möjligt att accelerera styrkortets livstid i Deros slipmaskinen. Ett testförslag har också gjorts, som beskriver hur den standardiserad metoden skall göras.
The accelerating methods used were: constant stress, step stress and cyclic stress. All these tests were performed in an environmental chamber. The factors used for accelerating the product were temperature, humidity, vibration and overload.
The results show that it is possible to accelerate the lifetime of the speed controller in the Deros sander. A test proposal has also been made, describing how the standardized test method should be done.
De använda accelerationsmetoderna var: konstant stress, stegstress och cyklisk stress. Alla dessa tester utfördes i ett klimatskåp. Faktorerna som användes för att accelerera produkten var temperatur, fuktighet, vibrationer och överbelastning.
Resultaten visar att det är möjligt att accelerera styrkortets livstid i Deros slipmaskinen. Ett testförslag har också gjorts, som beskriver hur den standardiserad metoden skall göras.