Lastiluukun laskentaprosessi ja laskentamallin määritys
Johansson, Jere (2019)
Johansson, Jere
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201904014145
https://urn.fi/URN:NBN:fi:amk-201904014145
Tiivistelmä
Opinnäytetyö tehdään MacGregor Finland Oy:lle, joka kuuluu Cargotec-konserniin. Opinnäytetyön tarkoituksena on suunnitella ja rakentaa konfiguroitava 3d-malli irtolastilaivan lastiluukkujen lujuuslaskentaan. Lastiluukun lujuuslaskentamallin suunnittelu ja toteutus kuvataan tässä opinnäytetyössä.
Uuden lujuuslaskentamallin suunnitteleminen aloitettiin keräämällä vanhaa dataa aikaisemmasta lujuuslaskentamallista sekä määrittämällä uudet parametrit uudelle lujuuslaskentamallille. Uudet parametrit perustuivat aikaisemman lujuuslaskentamallin käyttäjäkokemuksiin.
Lujuuslaskentamalli on 3d-pintamalli, joka mallinnettiin SolidWorksin 3D CAD-ohjelmistolla. Mallia ohjataan Tacton-konfiguraattorilla, jolla malli päivitetään haluttuun konfiguraatioon. Konfiguraattori luotiin Tacton Design Automation -ohjelmistolla. The thesis was commissioned by MacGregor Finland Oy, which is part of Cargotec Group. The purpose of this thesis was to design a new strength calculation model for hatch covers. This new strength calculation model will be used in designing hatch covers for bulk cargo and general cargo vessels. The process of designing a strength calculation model is described in this thesis.
Designing the new strength calculation model begain by collecting old data from a previous strength calculation model. The new strength calculation model has upgraded parameters which are based on the user experience of the previous strength calculation model.
The strength calculation model is a 3D surface model created with SolidWorks 3D-CAD software. The strength calculation model also has its own configuration interface. The configurator was created with Tacton Design Automation software.
Uuden lujuuslaskentamallin suunnitteleminen aloitettiin keräämällä vanhaa dataa aikaisemmasta lujuuslaskentamallista sekä määrittämällä uudet parametrit uudelle lujuuslaskentamallille. Uudet parametrit perustuivat aikaisemman lujuuslaskentamallin käyttäjäkokemuksiin.
Lujuuslaskentamalli on 3d-pintamalli, joka mallinnettiin SolidWorksin 3D CAD-ohjelmistolla. Mallia ohjataan Tacton-konfiguraattorilla, jolla malli päivitetään haluttuun konfiguraatioon. Konfiguraattori luotiin Tacton Design Automation -ohjelmistolla.
Designing the new strength calculation model begain by collecting old data from a previous strength calculation model. The new strength calculation model has upgraded parameters which are based on the user experience of the previous strength calculation model.
The strength calculation model is a 3D surface model created with SolidWorks 3D-CAD software. The strength calculation model also has its own configuration interface. The configurator was created with Tacton Design Automation software.