Konstruktion av slangklippningsmaskin
Nylund, Robin (2019)
Nylund, Robin
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201905067880
https://urn.fi/URN:NBN:fi:amk-201905067880
Tiivistelmä
Examensarbetet gick ut på att konstruera en slangklippmaskin som ska klippa klen medicinsk slang i små diametrar i anpassade längder. Med hjälp av teorin för produktutvecklings principer och tidigare modeller av klippen har det tagits fram olika koncept för att sedan välja en slutlig modell.
Syftet med detta arbete var att förbättra en redan befintlig slangklipp genom att ge den en rörelseriktning till, för att få möjligheten att förflytta undan klippen då den inte skall användas.
Genom att använda sig av de olika stegen i produktutvecklingsmodellen resulterade det i några olika koncept på hur maskinen skulle kunna vara konstruerad, vilket sedan komprimerades till en maskin och ett slutligt 3D-koncept.
I den slutliga 3D-designen som gjordes monterades samtliga skydd in då denna maskin kommer att genomgå en intern CE-märkning, som är baserad på ett flertal olika ISO standarder, innan den kommer att föras in i produktion. This work is about construction of a tube cutting machine that will cut small diameter medical tubing in adapted lengths. With the help of the theory behind product development principals and previous models of the tube cutting machine, a few different concepts were developed and then a final model was selected.
The purpose with this work was to improve an already existing tube cut by giving it one more motion direction to gain the possibility to move the cutting unit out of the way when not used.
By using the different steps in the product development model, concepts on how the machine could be constructed were developed. Later this resulted in one concept and one final 3D-drawing.
In the final 3D-drawing that was made, all the safety covers had to be fitted on the machine because it will undergo an internal CE-marking, which is based on multiple different ISO standards. The tube cutting machine must go through this documentation and clear it before it can go in.
Syftet med detta arbete var att förbättra en redan befintlig slangklipp genom att ge den en rörelseriktning till, för att få möjligheten att förflytta undan klippen då den inte skall användas.
Genom att använda sig av de olika stegen i produktutvecklingsmodellen resulterade det i några olika koncept på hur maskinen skulle kunna vara konstruerad, vilket sedan komprimerades till en maskin och ett slutligt 3D-koncept.
I den slutliga 3D-designen som gjordes monterades samtliga skydd in då denna maskin kommer att genomgå en intern CE-märkning, som är baserad på ett flertal olika ISO standarder, innan den kommer att föras in i produktion.
The purpose with this work was to improve an already existing tube cut by giving it one more motion direction to gain the possibility to move the cutting unit out of the way when not used.
By using the different steps in the product development model, concepts on how the machine could be constructed were developed. Later this resulted in one concept and one final 3D-drawing.
In the final 3D-drawing that was made, all the safety covers had to be fitted on the machine because it will undergo an internal CE-marking, which is based on multiple different ISO standards. The tube cutting machine must go through this documentation and clear it before it can go in.