Sisustuksen seinä- ja kattopaneelien 3D-mallinnuksen kehittäminen
Munkki, Petteri (2019)
Munkki, Petteri
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-201905159898
https://urn.fi/URN:NBN:fi:amk-201905159898
Tiivistelmä
Seinä- ja kattopaneelien mallinnus yksitellen on työlästä ja hidasta, ja paneeleihin tulee suunnittelun aikana paljon muutoksia. Seinä- ja kattopaneelien mallinnus on tärkeää tilavarausten hahmottamiseksi laivan perussuunnittelun aikana. Opinnäytetyön tarkoituksena on tutkia keinoja sisustuksen seinä- ja kattopaneelien 3D-mallinnuksen tehostamiseksi.
Työssä tarkastellaan mallinnuksen kehittämistä Aveva Marine Outfitting -sovellusten osalta. Työn avulla voidaan myös kehittää muutosten hallintaa. Työ keskittyy mallinnuksessa käytettäviin toimintatapoihin ja käytäntöihin, niiden yhtenäistämiseen sekä sisustusvuorauksen suunnittelussa ja mallinnuksessa huomioitaviin asioihin. Työssä käsitellään keinoja mallinnuksen toteutukseen siten, että mallinnetut tiedot ovat mahdollisimman hyvin hyödynnettävissä ja muokattavissa myöhemmin.
Tämä opinnäytetyö on toteutettu perehtymällä alan kirjallisuuteen sekä keräämällä kokemukseen perustuvaa tietoa haastatteluilla mallinnuksen ja sisustussuunnittelun parissa toimivilta kokeneilta työntekijöiltä. Työn tuloksena saatiin tiivis raportti sisustuksen seinä- ja kattopaneeleista sekä tehokkaista toimintatavoista ja käytännöistä mallinnuksessa. Tuloksena saatiin lisäksi yrityksen käyttöön työohjeita, joissa esitettyjen työkalujen avulla mallinnus on huomattavasti nopeampaa ja muutosten toteutus helpompaa lähtötilanteeseen verrattuna. Työn tuloksena valitut menetelmät nopeuttavat ja helpottavat mallinnustyötä ja muutosten hallintaa sekä tehostavat olemassa olevan suunnittelutiedon käyttöä mallinnuksessa. Modelling wall and ceiling panels separately is very time-consuming and requires a lot of work. Modelling interior wall and ceiling panels is important for understanding the required space reservations during the basic design phase. The purpose of this thesis was to study ways to develop the 3D modeling of interior wall and ceiling panels.
The thesis examines the development of modelling with Aveva Marine Outfitting applications. During the design process, the positions and dimensions of the panels change a lot, which is why this thesis is also focused on developing the change management. The thesis focuses on the methods and practices used in modelling, their standardization and on the aspects that need to be considered during modelling. The work deals with implementing the modelling so that the created information can be later used efficiently, and that making changes to the model later during the basic design is simple and easy.
The information in this thesis was gathered by looking into existing literature of the field as well as by conducting interviews with experienced designers. The result was a concise report on interior wall and ceiling panels along with efficient methods and practices in modelling. In addition, working instructions for the company were included in the final outcome. The instructions focus on modelling tools which not only make the modelling faster but also render the change management easier when compared to the starting point. The chosen methods make the modelling and change management faster and easier as well as increase the effectiveness of using the existing design data.
Työssä tarkastellaan mallinnuksen kehittämistä Aveva Marine Outfitting -sovellusten osalta. Työn avulla voidaan myös kehittää muutosten hallintaa. Työ keskittyy mallinnuksessa käytettäviin toimintatapoihin ja käytäntöihin, niiden yhtenäistämiseen sekä sisustusvuorauksen suunnittelussa ja mallinnuksessa huomioitaviin asioihin. Työssä käsitellään keinoja mallinnuksen toteutukseen siten, että mallinnetut tiedot ovat mahdollisimman hyvin hyödynnettävissä ja muokattavissa myöhemmin.
Tämä opinnäytetyö on toteutettu perehtymällä alan kirjallisuuteen sekä keräämällä kokemukseen perustuvaa tietoa haastatteluilla mallinnuksen ja sisustussuunnittelun parissa toimivilta kokeneilta työntekijöiltä. Työn tuloksena saatiin tiivis raportti sisustuksen seinä- ja kattopaneeleista sekä tehokkaista toimintatavoista ja käytännöistä mallinnuksessa. Tuloksena saatiin lisäksi yrityksen käyttöön työohjeita, joissa esitettyjen työkalujen avulla mallinnus on huomattavasti nopeampaa ja muutosten toteutus helpompaa lähtötilanteeseen verrattuna. Työn tuloksena valitut menetelmät nopeuttavat ja helpottavat mallinnustyötä ja muutosten hallintaa sekä tehostavat olemassa olevan suunnittelutiedon käyttöä mallinnuksessa.
The thesis examines the development of modelling with Aveva Marine Outfitting applications. During the design process, the positions and dimensions of the panels change a lot, which is why this thesis is also focused on developing the change management. The thesis focuses on the methods and practices used in modelling, their standardization and on the aspects that need to be considered during modelling. The work deals with implementing the modelling so that the created information can be later used efficiently, and that making changes to the model later during the basic design is simple and easy.
The information in this thesis was gathered by looking into existing literature of the field as well as by conducting interviews with experienced designers. The result was a concise report on interior wall and ceiling panels along with efficient methods and practices in modelling. In addition, working instructions for the company were included in the final outcome. The instructions focus on modelling tools which not only make the modelling faster but also render the change management easier when compared to the starting point. The chosen methods make the modelling and change management faster and easier as well as increase the effectiveness of using the existing design data.