Design of an IoT system to collect data about the weather conditions inside of a building using RuuviTag
Zarza Roa, Alejandro (2019)
Zarza Roa, Alejandro
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019053113855
https://urn.fi/URN:NBN:fi:amk-2019053113855
Tiivistelmä
The advances that we are experiencing today in our forms of communication, are applied little by little to our day to day. I decided to take as the basis for the project these advances, the technologies we have at our disposal, and the op-portunity I that I had doing the thesis in Finland.
We started from a device developed in Finland. The purpose was always to improve the quality of life of the students. Therefore, due to the harsh climatic conditions here, I decided to create a system based in internet of things that would monitor these conditions inside a home. This system had to be able to detect possible problems in real time.
The first step, was to study the tools needed to implement it, including various devices, as well as the software that could be used.
Finally, it was found that it was possible to set up a low-cost system, capable of being very efficient at detecting anomalies, and that could be perfectly adapted to an old building.
With these results we have achieved our objectives, the first one was to process an almost instantaneous report of a problem. This avoids the bureaucracy of generating a complaint to the central office, which manage the incidence. In our case, the alert can be directly reported to maintenance. Secondly, the objective was to create a low-cost and easy to implement system in an old building. This means that, for a not very high amount of money, you can adapt any installation and save costs by improving the service. Los avances que estamos experimentando hoy en día en nuestras formas de comunicación, se ven aplicados poco a poco a nuestro día a día. Decidí tomar como base para el proyecto estos avances, las tecnologías que tenemos a nuestro alcance, y la oportunidad que tengo de hacer la tesis en Finlandia.
Partimos de un dispositivo desarrollado aquí en Finlandia. El propósito siempre fue mejorar la calidad de vida de los estudiantes. Por lo tanto, debido a las duras condiciones climáticas que se producen, opté por crear un sistema basado en el internet de las cosas que monitorizara estas condiciones en el interior de una vivienda. Este sistema tenía que ser capaz de detectar posibles problemas a tiempo real.
Se comenzó a estudiar las necesidades para implementarlo, incluido varios dispositivos, así como el software que se podía utilizar.
Finalmente se halló que era posible montar un sistema de bajo coste, capaz de ser muy eficiente detectando anomalías, y que se podía adaptar perfectamente a un edificio antiguo.
Con estos hallazgos damos por conseguidos nuestros objetivos, el primero procesar un reporte casi instantáneo de una incidencia. De esta manera se evita la burocracia de generar una queja a la oficina central, y que esta se encargue de gestionar. En nuestro caso, directamente se puede reportar la alerta a mantenimiento. En segundo lugar, el objetivo fue crear un sistema de bajo coste y fácil de implantar en un edificio antiguo. Lo cual supone que por una cantidad no muy alta de dinero se puede adaptar cualquier instalación y ahorrar costes mejorando el servicio.
We started from a device developed in Finland. The purpose was always to improve the quality of life of the students. Therefore, due to the harsh climatic conditions here, I decided to create a system based in internet of things that would monitor these conditions inside a home. This system had to be able to detect possible problems in real time.
The first step, was to study the tools needed to implement it, including various devices, as well as the software that could be used.
Finally, it was found that it was possible to set up a low-cost system, capable of being very efficient at detecting anomalies, and that could be perfectly adapted to an old building.
With these results we have achieved our objectives, the first one was to process an almost instantaneous report of a problem. This avoids the bureaucracy of generating a complaint to the central office, which manage the incidence. In our case, the alert can be directly reported to maintenance. Secondly, the objective was to create a low-cost and easy to implement system in an old building. This means that, for a not very high amount of money, you can adapt any installation and save costs by improving the service.
Partimos de un dispositivo desarrollado aquí en Finlandia. El propósito siempre fue mejorar la calidad de vida de los estudiantes. Por lo tanto, debido a las duras condiciones climáticas que se producen, opté por crear un sistema basado en el internet de las cosas que monitorizara estas condiciones en el interior de una vivienda. Este sistema tenía que ser capaz de detectar posibles problemas a tiempo real.
Se comenzó a estudiar las necesidades para implementarlo, incluido varios dispositivos, así como el software que se podía utilizar.
Finalmente se halló que era posible montar un sistema de bajo coste, capaz de ser muy eficiente detectando anomalías, y que se podía adaptar perfectamente a un edificio antiguo.
Con estos hallazgos damos por conseguidos nuestros objetivos, el primero procesar un reporte casi instantáneo de una incidencia. De esta manera se evita la burocracia de generar una queja a la oficina central, y que esta se encargue de gestionar. En nuestro caso, directamente se puede reportar la alerta a mantenimiento. En segundo lugar, el objetivo fue crear un sistema de bajo coste y fácil de implantar en un edificio antiguo. Lo cual supone que por una cantidad no muy alta de dinero se puede adaptar cualquier instalación y ahorrar costes mejorando el servicio.