Kylmäkalusteiden energiatehokkuuden vertailu ja energiatehokkuuden parantaminen
Hieta, Mika (2019)
Hieta, Mika
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019061817323
https://urn.fi/URN:NBN:fi:amk-2019061817323
Tiivistelmä
Tässä opinnäytetyössä vertailtiin yrityksen vanhemman Proff 2G sekä uudemman Proff 2G ECO keittiökylmälaitteiden energiatehokkuuksia. Lisäksi vanhemmasta Proff 2G mallista tehtiin energiatehokkaampi rakennemuutoksilla.
Proff 2G ECO-tuotemalli suunniteltiin vuonna 2016, jotta pystyttäisiin kilpailemaan markkinoilla hinnan lisäksi myös energiatehokkuudessa. Ongelmaksi tuli myöhemmin varsinkin pienempien tuotteiden pieni kate. Tässä opinnäytetyössä keskityttiin ainoastaan 1200 (mm) leveisiin tuotteisiin. Muita tuoteleveyksiä on kuitenkin myös 800, 1600 ja 2000 (mm).
Työ aloitettiin kirjoittamalla mallien rakenne-eroista. Lisäksi työssä käytettiin yrityksen tehtaan laboratoriota hyödyksi kylmälaitteiden mittauksessa. Lopuksi pohdittiin, kuinka vanha Proff 2G-malli saataisiin energiatehokkaammaksi ilman suuria lisäkustannuksia. The purpose of this thesis was to compare the energy efficiency differences between Proff 2G cold drawer and Proff ECO cold drawer. The reason behind this was because the ECO model was more expensive and less cost effective than the older Proff 2G model. After comparing the two models the focus was in making a better version of Proff 2G model.
This thesis was started with explaining the structure differences between the two models. After going through the structures of both models it explains how to do energy efficiency measurements. In the end this thesis will show the changes to the older Proff 2G model and the energy efficiency results after those changes.
Proff 2G ECO-tuotemalli suunniteltiin vuonna 2016, jotta pystyttäisiin kilpailemaan markkinoilla hinnan lisäksi myös energiatehokkuudessa. Ongelmaksi tuli myöhemmin varsinkin pienempien tuotteiden pieni kate. Tässä opinnäytetyössä keskityttiin ainoastaan 1200 (mm) leveisiin tuotteisiin. Muita tuoteleveyksiä on kuitenkin myös 800, 1600 ja 2000 (mm).
Työ aloitettiin kirjoittamalla mallien rakenne-eroista. Lisäksi työssä käytettiin yrityksen tehtaan laboratoriota hyödyksi kylmälaitteiden mittauksessa. Lopuksi pohdittiin, kuinka vanha Proff 2G-malli saataisiin energiatehokkaammaksi ilman suuria lisäkustannuksia.
This thesis was started with explaining the structure differences between the two models. After going through the structures of both models it explains how to do energy efficiency measurements. In the end this thesis will show the changes to the older Proff 2G model and the energy efficiency results after those changes.