Opetusvideo CAD-suunnittelusta hammastekniikassa : 3Shape Dental System -ohjelmiston käyttö
Roivainen, Emma; Sydänmaa, Petra (2019)
Roivainen, Emma
Sydänmaa, Petra
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019110220551
https://urn.fi/URN:NBN:fi:amk-2019110220551
Tiivistelmä
Tietokoneavusteinen suunnittelu ja valmistus (CAD/CAM) yleistyvät hammastekniikassa koko ajan enemmän. CAD/CAM -teknologia kehittyy jatkuvasti nykyaikaistaen hammasteknistä osaamista. Tällä hetkellä teknologialla voidaan suunnitella ja valmistaa erilaisia hammasteknisiä töitä, kuten irtoprotetiikkaa, kruunuja, siltoja ja implantteja. Eri materiaaleja töiden valmistukseen on runsaasti, yleisimpinä lasikeraami, zirkoniumoksidi ja PMMA. Laitteistokokonaisuus sisältää skannerin, suunnitteluohjelmiston sekä valmistuslaitteen, yleisimmin jyrsimen.
Opinnäytetyön tarkoituksena oli tuottaa video 3Shapen suunnitteluohjelman käytöstä Turun ammattikorkeakoulun hammasteknikkokoulutuksen opetuskäyttöön ja opetusmateriaaliksi. Tavoitteena oli saada opetusvideo opiskelijoiden hyödynnettäväksi, jotta ohjelman käyttäminen helpottuu. Tarkoituksena on, että opiskelija oppii opetusvideosta ja opiskelijalla on mahdollisuus itsenäiseen opiskeluun opetusvideon tukemana. Aikaisempaa suomenkielistä opetusmateriaalia CAD-suunnittelusta on vain kirjallisena oppaana, jonka ohella jatkossa tämä opetusvideo toimii oppimisen tukena.
Opinnäytetyö on kehittämistyö, joka on toteutettu toiminnallisena opinnäytetyönä. Opinnäytetyö koostuu teoriaosuudesta, toteutusosuudesta sekä toiminnallisesta osuudesta, joka oli videon valmistus. Teoriaosuudessa käsitellään aluksi hyvän opetusvideon sisältöä. Osuus jatkuu kerronnalla, mitä CAD/CAM -teknologia on, mitä siihen kuuluu ja miten se näkyy hammasteknikkokoulutuksessa. Osuuden lopussa tutustutaan tarkemmin 3Shapen suunnitteluohjelman toimintoihin.
Toteutusosuudessa selvitämme, miten toiminnallinen osuus on toteutettu. Kerromme videon kuvaamisesta, editoinnista, äänittämisestä sekä kohderyhmältä saamastamme palautteesta ja sen läpikäymisestä. Lopuksi arvioimme tuotoksen onnistumista ja pohdimme työn eettisyyttä ja luotettavuutta. Valmis opetusvideo julkaistiin koulutusohjelman YouTube -kanavalla. Computer aided design and manufacturing (CAD/CAM) is becoming continually more common nowadays. CAD/CAM-technology is constantly evolving, modernizing dental technological expertise. Currently this technology can be used to design and manufacture different types of dental restorations, such as removable prosthodontics, crowns, bridges and implants. There are ample variety of different materials for manufacturing, which include ceramic materials, zirconium and PMMA. CAD/CAM-facilities include a scanner, software for designing and a processing device.
The purpose of thesis is to produce a video on the use of the 3Shape CAD -designing software in Dental Technology Degree Programme in Turku University of Applied Sciences. The objective of the thesis is to use the video as an educational material for dental technology students, to support their learning. The intent is that the student learns from the educational video and can study independently with the support of the video. Currently there are written instructions for dental CAD -designing in Finnish, which the video reinforces.
The thesis is a development work that has been carried out as a functional thesis. The thesis consists of three sections; theory section, an implementation section and a functional section, which is the production of the educational video. Firstly, in the theory section, the content of a good educational video is discussed. The section continues with narration of what CAD/CAM - technology is, what the facilities include and how it appears in the Dental Technology Degree Programme. The functions of the 3Shape designing program are discussed at the end of the section. In the implementation section, there is a report of how the implementation of the operational part has been done. It includes information of filming, editing, recording and the feedback from the target audience and how it has been gone through. The written report of the thesis ends in the evaluation of the success and consideration of ethics and reliability of the project. The educational video was published on the degree programme’s YouTube-channel.
Opinnäytetyön tarkoituksena oli tuottaa video 3Shapen suunnitteluohjelman käytöstä Turun ammattikorkeakoulun hammasteknikkokoulutuksen opetuskäyttöön ja opetusmateriaaliksi. Tavoitteena oli saada opetusvideo opiskelijoiden hyödynnettäväksi, jotta ohjelman käyttäminen helpottuu. Tarkoituksena on, että opiskelija oppii opetusvideosta ja opiskelijalla on mahdollisuus itsenäiseen opiskeluun opetusvideon tukemana. Aikaisempaa suomenkielistä opetusmateriaalia CAD-suunnittelusta on vain kirjallisena oppaana, jonka ohella jatkossa tämä opetusvideo toimii oppimisen tukena.
Opinnäytetyö on kehittämistyö, joka on toteutettu toiminnallisena opinnäytetyönä. Opinnäytetyö koostuu teoriaosuudesta, toteutusosuudesta sekä toiminnallisesta osuudesta, joka oli videon valmistus. Teoriaosuudessa käsitellään aluksi hyvän opetusvideon sisältöä. Osuus jatkuu kerronnalla, mitä CAD/CAM -teknologia on, mitä siihen kuuluu ja miten se näkyy hammasteknikkokoulutuksessa. Osuuden lopussa tutustutaan tarkemmin 3Shapen suunnitteluohjelman toimintoihin.
Toteutusosuudessa selvitämme, miten toiminnallinen osuus on toteutettu. Kerromme videon kuvaamisesta, editoinnista, äänittämisestä sekä kohderyhmältä saamastamme palautteesta ja sen läpikäymisestä. Lopuksi arvioimme tuotoksen onnistumista ja pohdimme työn eettisyyttä ja luotettavuutta. Valmis opetusvideo julkaistiin koulutusohjelman YouTube -kanavalla.
The purpose of thesis is to produce a video on the use of the 3Shape CAD -designing software in Dental Technology Degree Programme in Turku University of Applied Sciences. The objective of the thesis is to use the video as an educational material for dental technology students, to support their learning. The intent is that the student learns from the educational video and can study independently with the support of the video. Currently there are written instructions for dental CAD -designing in Finnish, which the video reinforces.
The thesis is a development work that has been carried out as a functional thesis. The thesis consists of three sections; theory section, an implementation section and a functional section, which is the production of the educational video. Firstly, in the theory section, the content of a good educational video is discussed. The section continues with narration of what CAD/CAM - technology is, what the facilities include and how it appears in the Dental Technology Degree Programme. The functions of the 3Shape designing program are discussed at the end of the section. In the implementation section, there is a report of how the implementation of the operational part has been done. It includes information of filming, editing, recording and the feedback from the target audience and how it has been gone through. The written report of the thesis ends in the evaluation of the success and consideration of ethics and reliability of the project. The educational video was published on the degree programme’s YouTube-channel.