Jatkuvan tunnistautumisen järjestelmän suunnitelma : ääniohjatulle työnohjausjärjestelmälle
Koskela, Aki (2019)
Koskela, Aki
2019
All rights reserved. This publication is copyrighted. You may download, display and print it for Your own personal use. Commercial use is prohibited.
Julkaisun pysyvä osoite on
https://urn.fi/URN:NBN:fi:amk-2019121226221
https://urn.fi/URN:NBN:fi:amk-2019121226221
Tiivistelmä
Työn toimeksiantaja yrityksellä on ääniohjattava työnohjausjärjestelmä, johon on tarpeena kehittää tunnistautumisjärjestelmä. Tarkoituksena kehittää ohjelmiston luotettavuutta ja varmuutta laadunvarmistuksessa. Tämän työn tarkoituksena oli luoda suunnitelma tunnistautumisjärjestelmän arkkitehtuurille sekä valita teknologiat, joilla sen voi toteuttaa. Käytännön osuudessa toteutettiin mahdollisimman suuri osa suunnitelmasta.
Suunnitelman toteuttaminen tapahtui tekemällä töitä yrityksen ohjelmiston parissa. Tarkoituksena oli saada ymmärrys ohjelmiston toiminnasta sekä yrityksen tarpeista. Nopeasti tuli esille, että yrityksen tarpeisiin sopii moniosainen biometrinen tunnistautumisjärjestelmä. Valitut biometriset tunnistautumiskeinot ovat kasvontunnistus ja äänen biometria. Niiden lisäksi valittiin myös PINkoodi lisätunnistautumista varten.
Järjestelmä suunniteltiin modulaariseksi, siten että uusia tunnistautumisteknologioita ja -innovaatioita pystyy tarvittaessa ottamaan käyttöön mahdollisimman helposti.
Käytännön osuudessa ehdittiin toteuttamaan valmis suunnitelma tunnistautumisjärjestelmän kokonaisarkkitehtuurista, joka sisältää valitut menetelmät ja teknologiat, jotka sopisivat yrityksen tämänhetkisiin tarpeisiin. Lisäksi käytännön osuudessa ehdittiin toteuttamaan kasvojentunnistus sekä PIN-koodi toiminnot. Kehitystyötä tullaan jatkamaan tähän suunnitelmaan perustuen. The company that commissioned this thesis has a voice controlled management system, that they aim to develop for an authentication system with the purpose of increasing credibility and effectiveness of quality assurance. The purpose of this thesis is to create a plan for the architecture of the authentication system, while choosing technologies to be used in the project. As much of the works as possible is to be completed in the practical part of the work.
Work on the plan was done by the author working for the company developing their software. Purpose of this was to gain an understanding of how the software works and the development needs of the company.
Very quickly it became apparent that a multi-modal biometric authentication system would be a perfect solution. The chosen methods of biometric authentication were face recognition and voice biometrics. Alongside them it was decided to implement a PIN-code functionality for additional authentication. The authentication system was design to be modular so that the company can easily implement new authentication technologies and innovations in the future.
A plan for the architecture of the system, along with the chosen technologies for the implementation that were deemed fitting for the needs of the company, was produced during the practical part of the work. Along with the plan, face recognition and pin-code functions were fully implemented. The company will continue the development of the authentication system based on this plan.
Suunnitelman toteuttaminen tapahtui tekemällä töitä yrityksen ohjelmiston parissa. Tarkoituksena oli saada ymmärrys ohjelmiston toiminnasta sekä yrityksen tarpeista. Nopeasti tuli esille, että yrityksen tarpeisiin sopii moniosainen biometrinen tunnistautumisjärjestelmä. Valitut biometriset tunnistautumiskeinot ovat kasvontunnistus ja äänen biometria. Niiden lisäksi valittiin myös PINkoodi lisätunnistautumista varten.
Järjestelmä suunniteltiin modulaariseksi, siten että uusia tunnistautumisteknologioita ja -innovaatioita pystyy tarvittaessa ottamaan käyttöön mahdollisimman helposti.
Käytännön osuudessa ehdittiin toteuttamaan valmis suunnitelma tunnistautumisjärjestelmän kokonaisarkkitehtuurista, joka sisältää valitut menetelmät ja teknologiat, jotka sopisivat yrityksen tämänhetkisiin tarpeisiin. Lisäksi käytännön osuudessa ehdittiin toteuttamaan kasvojentunnistus sekä PIN-koodi toiminnot. Kehitystyötä tullaan jatkamaan tähän suunnitelmaan perustuen.
Work on the plan was done by the author working for the company developing their software. Purpose of this was to gain an understanding of how the software works and the development needs of the company.
Very quickly it became apparent that a multi-modal biometric authentication system would be a perfect solution. The chosen methods of biometric authentication were face recognition and voice biometrics. Alongside them it was decided to implement a PIN-code functionality for additional authentication. The authentication system was design to be modular so that the company can easily implement new authentication technologies and innovations in the future.
A plan for the architecture of the system, along with the chosen technologies for the implementation that were deemed fitting for the needs of the company, was produced during the practical part of the work. Along with the plan, face recognition and pin-code functions were fully implemented. The company will continue the development of the authentication system based on this plan.